Page 131 - MUD-catalog-2019_Neat

Ø D
+.001
L TO
+.002
Ø SHCS C'BORE
BOLT INCLUDED
C 131
Quick-Change Components
Insert Mold Pillar Posts

Ø D Ø D FRAME WITHOUT FRAME WITH EJECTOR FRAME WITH EJECTO
EJECTOR PLATE PLATE AND NO PAD PLATE AND SUPPORT PAD

Insert Mold Pillar Posts
+.001
+.001 ITEM NO. DIAMETER LENGTH BOLT SIZE
L TO L TO .375
+.002 +.002 MPP1025 1.00 2.500 5/16
MPP1026 1.00 2.625 5/16
CUSTOMER TO
MPP1035 1.00 3.500 5/16
10-32 SHCS INSTALL RUNNER
MPP1037 1.00 3.750 3/8
MPP1040 1.00 4.000 3/8
MPP1041 .375 4.125 3/8
1.00
.875
Ø SHCS C'BORE
Ø SHCS C'BORE MPP1225 1.25 2.500 5/16
BOLT INCLUDED
BOLT INCLUDED
MPP1226 1.25 2.625 5/16
MPP1235 1.25 3.500 5/16
.25 R .375
MPP1237 1.25 3.750 3/8
DME cold-rolled steel pillar posts are precision ground to length for 1.750 1.25 4.000 3/8
MPP1240
MUD Quick-Change systems. Each is predrilled and supplied with MPP1241 1.25 4.125 3/8
socket head cap screws for easy installation in insert molds. MPP1525 1.50 2.500 5/16
MPP1526 1.50 2.625 5/16
MPP1535 1.50 3.500 5/16
Frames supplied with master ejector plates are supplied standard with MPP1537 1.50 3.750 3/8
pillar post pads. The pillar post pad is the same height as the height of MPP1540 1.50 4.000 3/8
the ejection. In cases where pillar post pads are not utilized, the pillar MPP1541 1.50 4.125 3/8
post will rest on the back clamp plate. All molds require pillar posts and Bolt included with each pillar post.
Other sizes available on request.
the pillar post will be precision ground .001 to .002 higher than the height
of ejection. MUD Quick-Change Components for Mold Frames & Inserts | Pillar Posts & Hardened Runner Pads
Quick-Change Components
Hardened Runner Pads
FRAME WITH EJECTOR FRAME WITH EJECTO
FRAME WITHOUT
FRAME WITH EJECTOR FRAME WITH EJECTO
FRAME WITHOUT
PLATE AND SUPPORT PAD
EJECTOR PLATE
PLATE AND NO PAD
EJECTOR PLATE PLATE AND NO PAD PLATE AND SUPPORT PAD
.375 .375
CUSTOMER TO
CUSTOMER TO
10-32 SHCS 10-32 SHCS INSTALL RUNNER
INSTALL RUNNER
.375 .375
.875 .875

.375
.25 R .25 R .375 DME hardened runner pads are designed for installation in
1.750
1.750
insert molds ordered for MUD Quick-Change shuttle frame
applications (09/07UF, 09/07EB and 12/08UF). These pads
ITEM NO. allow the molding machine injection nozzle to contact the
09/07HRP companion insert mold without damage.
One required for each insert mold half.
Includes (2) 10-32 x 2 / 2" cap screw.
1

U.S. 800-626-6653 ■ www.dme.net

Canada 800-387-6600 ■ Mexico 52-442-713-5666