Page 153 - MUD-catalog-2019_Neat

OP 153
Quick-Change Options
DME Standard Heat Pipes

■ Reduce cycle time Silver Heat Transfer Compound* for
■ Improve part quality TPL and TPH Series Heat Pipes (Item No. HTC06S)
Contains micronic particles of silver to provide a
■ Simplify mold and die design
thermal resistance of 4.75°Cin/watt. The compound
■ Reduce operating and maintenance costs is supplied in a 5cc plastic syringe. (DME recommends the
■ Upgrade existing molds and dies Silver Heat Transfer Compound because it has eight times
lower thermal resistance than the copper equivalent.)
■ Salvage damaged molds and dies
Copper Heat Transfer Compound* for
Selecting the Right Size, Shape and Temperature Range TPL, TPH and TPDC Series Heat Pipes (Item No. HTC30C)
The standard diameters, lengths and temperature ranges Contains micronic particles of copper to provide a thermal
of TPL, TPH and TPDC Series Heat Pipes will satisfy resistance of 38°Cin/watt. The compound is supplied in a
most applications. 5cc plastic syringe.

NOTE: Heat Pipes cannot be used as ejector pins and parts cannot * For .125" diameter Heat Pipes, do not use applicator tube
be molded or cast against them. Also, Heat Pipes cannot be cut,
machined, bent or plated. If a special size is required, contact DME supplied with Heat Transfer Compound. Apply desired
to discuss your application. amount of compound directly into core hole. MUD Quick-Change Options for Mold Frames & Inserts | DME Standard Heat Pipes

TPL, TPH and TPDC SERIES TOLERANCES Tamp Ring Sets
Diameter (O.D.) ±.004 Each set includes 32 silver alloy tamp rings (enough for
Length ±.020 installing 16 Heat Pipes) and one hollow tamping tube.
Select the required tamp ring set by its I.D. to match the
TPL and TPH Heat Pipes for Injection Molding O.D. of the Heat Pipe being used.
For low-temperature Heat Pipes (40°-200°F) use TPL (color-
coded BLACK) as a prefix in front of item number in the ITEM NO. TARS04 TARS06 TARS08 TARS10 TARS12 TARS16
3/8
1/2
5/16
1/4
3/16
Ring I.D.
1/8
table below. For high-temperature Heat Pipes (150°-400°F)
use TPH (color-coded WHITE) as the prefix.
Examples: TPL8600; TPH6500.
LENGTH TPL & TPH DIAMETER & ITEM NUMBER
(INCHES) 1/8 3/16 1/4 5/16 3/8 1/2
3 4300 6300 8300 10300 12300 16300
4 4400 6400 8400 10400 12400 16400
5 4500 6500 8500 — — —
6 4600 6600 8600 10600 12600 16600
7 4700 6700 8700 — — —
8 4800 6800 8800 10800 12800 16800
10 — — — 101000 121000 161000
12 — — — — — 161200

U.S. 800-626-6653 ■ www.dme.net

Canada 800-387-6600 ■ Mexico 52-442-713-5666