Page 28 - MUD-catalog-2019_Neat
P. 28
UF 28
12/08 UF Quick-Change U-Style Shuttle
UF 321 Frame & Companion Insert Molds
Companion Interchangeable Insert Molds
1 Frame clamps at this end of insert mold and ejector plates are flush with this end of insert.
2 Support post not supplied. Grind +.001 to +.002 higher than height of ejection (see page C 131).
3 Thicker plate optional (quotation on request).
Shuttle 4 3/4 x 5° lead this end.
Frame
Standard Solid: T-Style Laminated: Optional
ITEM NO. 8.0 x 8.0 11.9 x 8.0
12/08 UF 321 1 .31 1
.562
UF 321 Frame Upper – Side View 7.000 Ejector .562 6.88 Ejector
1.75 8.000 6.88 Half 7.000 Half
Ø S 3.990 .218 .75 8.000 1.31
.562 4 .562 4 Ø 5/16
UC 3816 .73 .687 ± .001 .687 6.68 Dowel
.51 1.00 Offset 7.996 Offset 11.874 Hardened runner pads
MUD Quick-Change Mold Frames & Inserts for U-Style | 12/08 UF 321
8.716 available (quotation on
“S” diameter of locating ring supplied standard request).
3.990 (other sizes available on request). .494 8.716
.494 .360 1.00 .360 7.996 ± .001 1.00
UF 321 Frame Upper – Top View
A A A2
Ø .500 Ø .500
1.50
1.00 1.00 B2
3.500 B B
2
2 7.00
5.937 .360 7.00 3 .360 Central 3
.360 Central .360
Cavity half, one (1) required. 2.500 2.500
Ejection Ejection
UF 321 Frame Lower – Side View
Standard Solid Construction
3/8-16 THD
1.00 ITEM NO. A A2 B2 B
.375 12/08 SSU 221 2.877 1.877 1.877 2.877
.500 3.50 4.12
.81
T-Style Laminated Construction
.50 7.25 ± .0005 .62 ITEM NO. A A2 B2 B
2.500*
* Height of ejection can be modified to suit nozzle 12/08 TLU 201 2.877 1.877 1.877 2.877
height of machine (quotation on request).
Ordering information for frame and companion insert
UF 321 Frame Lower – Top View molds can be found in the front of this section.
+.002 3/4 x5° Lead
8.000 -.000
Ø 1.12
7.000
8.00
3.500
11.87 1.00
.500
Ejector half, two (2) required.
NOTE: Insert molds can be ordered with two (2) “B”
halves by noting “S” after catalog code number.
U.S. 800-626-6653 n www.dme.net
Canada 800-387-6600 n Mexico 52-442-713-5666