Page 82 - MUD-catalog-2019_Neat

DF 82

Quick-Change Double H frame
features and applications

®
This MUD Quick-Change frame series features a fixed center runner bar for
simultaneous molding with four standard-style companion insert molds. The
series offers cost reduction benefits and time-saving advantages similar to
Quick-Change the U frame and H frame series. It also provides comparable design flexibility.
Double H frame Each of the four companion insert molds for Double H frames can be changed
options individually and independently. Dummy inserts or runner shutoffs are available
MUD Quick-Change Mold Frames and Inserts for Double H-Style | Features and Applications
for molding with fewer than four insert molds. These features give the Double H
n Spring-loaded master ejector plates frame series maximum versatility for tailoring production to inventory require-
n Interlocking ejector rails ments including just-in-time scheduling.

n Additional height on ejector rails Double H frames also offer special advantages for high volume production.
n Early return on ejector system Simultaneous molding with four insert molds quadruples quantities for each
Special knockout hole locations cycle. Also, there is virtually no need to interrupt production for maintenance or
n
repair since inexpensive backup insert molds can be installed quickly.
n Runner shutoffs
n Choice of runner configuration Double H frames are supplied with hardened center runner bars and replace-
able sprue puller pin assemblies. Each frame includes a locking locating ring
n Frame spacer bars
and an integral master ejector plate with cutouts to allow installation of insert
n Insulation boards mold pillar posts. The master ejector plate is also supplied with positive aligning
Additional retainer slot guide posts, bushings and grease fittings for a guided ejector system.
n
and spacer plate
Options include interlocking ejector rails to lock the insert mold’s ejector system
n Water lines for center sections to the master ejector plate. The master ejector plate can be spring loaded for
n Water lines for rails and plates returning the insert mold’s ejector system. It can also be tied to the machine’s

n Machining for cartridge heaters hydraulic knockout system for stroking the insert mold’s ejector assembly.
n Manifold for hot runner operation Other options include water lines in the center bar or other locations, insulation
Hot sprue bushings boards, runner shutoffs and hot sprue bushings. Frame spacer bars to accom-
n
modate shorter, more economical companion insert molds are available for
n Coating options frames designed for longer sizes. Additional retainer slots and a spacer
n Electroless nickel plating plate in the frame’s cavity half allow the frame to accept insert molds with
different thicknesses.

NOTE: Specifications subject to change Quick-Change Hot Runner Molding
without prior notice.
All of the advantages of the MUD Quick-Change Concept can be added to a
hot runner molding system with the addition of a manifold to the Double H frame.
Both the frame and the hot runner system remain in the molding machine. Only
the insert molds are changed to produce new parts, just as in other Quick-
Change applications. This means faster changeovers, lower tooling costs and
greater scheduling flexibility for hot runner molding.

Steel specifications: Standard frames are produced in prehard steel
(285-325 Brinell) with hardened center sections. Frames are also available in
prehard stainless, 420 stainless, H-13 and other grades on request. Frame
coating can be specified.

U.S. 800-626-6653 n www.dme.net

Canada 800-387-6600 n Mexico 52-442-713-5666