Page 105 - Hot Runner & Control Systems 2020

Obsolete Replacement Parts 103

Gate Shell Insulators

Gate Shell Insulators

n Improves insulation in the tip area
n Provides seal-off to eliminate material degradation in threaded area of tip

n Minimizes material in gate area to allow for faster color changes
n Withstands temperatures up to 550° F

Typical Application TYPICAL APPLICATION

D DIA.

GATE SHELL Custom Hot Runner Systems | New Products
INSULATOR

Gate Shell Insulators

FOR BUSHING OR ITEM D ITEM
NOZZLE STYLE FOR TIP STYLE NUMBER DIA. NUMBER

Gate-Mate 4 Standard, Super Sharp, No Hole GSI0001 .748 GSI0001
Nozzle Thru Hole GSI0002 GSI0002
Jumbo Gate-Mate Standard GSI0003 1.248 GSI0003
Bushing or Nozzle Thru Hole GSI0004 GSI0004
Hot Runner Systems | 4-Zone and 8-Zone Timer-Based Sequencers
Medium Gate-Mate Standard, Super Sharp, No Hole GSI0005 .748 GSI0005
Bushing Thru Hole GSI0006 GSI0006

APPLICATION NOTES:
1. Use only with bushings, nozzles and tip styles shown in the reference chart above
2. Gate machining must be done according to DME specifications
3. Nozzle tip cannot be altered in any way for the Gate Shell Insulator
to perform properly
4. If dissimilar resins are to be processed in the same mold, it is recommended that
their processing temperatures be within a similar range
5. For best results, the outer surface of the tip should be free from all resin before
the Gate Shell Insulator is installed or used

U.S. 800-626-6653 n Canada 800-387-6600 n dme@milacron.com n www.milacron.com