Page 125 - Hot Runner & Control Systems 2020

Smart Series ® 122

CE COMPLIANT! DME Mainframes and Modules comply with
Electromagnetic compatibility and low voltage directives

Control Modules

SSM (15 and 30 AMP): The SSM module provides accurate temperature control, including Smart Start
®
heater dry out circuitry, thermocouple fault displays and auto/manual modes of operation. The SSM
features automatic or manual bumpless transfer which, in the event of a thermocouple fault, provides
switch over to manual mode at the proper power setting to continue molding until the fault can be
corrected. This module can also trigger remote standby heat (idle), boost, off, and alarm functions when
used with the TAS module.
TSM (15 AMP): The TSM15 Smart Series Module has a color touch screen digital display
providing readouts for Actual Temperature, Current Mode, Percentage Power and Current
Reading. Closed-loop,
fuzzy logic PID control, and auto-tuning of PID parameters provide precise control even under the
most adverse processing conditions..
Accessory Modules
SSM1512 TAS: The TAS module provides over/under visual and audible alarms, boost, and standby heat control

with control modules as stated above. The TAS module can accommodate up to 63 zones of control.
Alarm is activated at ± 30° F. See pages 143-144 for details.

NOTE: The TAS accessory module requires the use of “MFC” style communications mainframes.
Non-communications frames may be upgraded on-site with installable kits. Smart Series ® | CE COMPLIANT! Control Modules

Simplified Power Hook-Up
TSM1512 Concern for user convenience didn’t stop with improved operation features. DME
went one step beyond
to ensure that the power hook-up procedure goes smoothly as well. For this reason,
detailed schematics
for various hook-ups are provided directly on all mainframe back panels. If it is ever
necessary to change
the configuration, these diagrams will help ensure safe and proper connections. All
wiring diagrams can
be referenced at the end of this section.

SSH Controller (10 AMP)

The SSH is a stand-alone single zone controller ideal SSH1022
for use with hot sprue bushings or machine nozzles.

U.S. 800-626-6653  Canada 800-387-6600  dme@milacron.com  www.dme.net