Page 150 - Hot Runner & Control Systems 2020

147 Smart Series ®
RoHS/WEEE Compliant: Microprocessor-Based Temperature Control
Modules with Digital Display and Setpoint Pushwheel

SSM1512/11 (15 AMP) & SSM3012 (30 AMP)

Warranty: MODULE VOLTAGE
Two years ITEM NUMBER (VAC) AMPS WATTS
(excluding triac and fuses)
SSM1512 240 15 3600
Fuse Requirements SSM1511 120 15 1800
(15 AMP only)
(2) ABC15 fuses (Bussman only) SSM3012 240 30 7200
(2) spare fuses included
with module NOTE: Standard (240 VAC) modules are compatible with mainframes wired for either
240 VAC three phase (standard) or 240 VAC single phase.

Front Panel Controls and Indicators

1. Process Temperature Display
Indicates process temperature, thermocouple faults and other operational modes.
Displays % power when switch (3) is in “% Auto” position.

| Control Modules with Digital Display
4
2. Temperature Deviation Lights
1 Indicates deviation from setpoint. Outer lights blink when temperature is more
than ±40˚F (22˚C) from setpoint.
2
3. Auto/Manual/Auto % Power Switch
Selects AUTO or MANUAL control mode. Shows % power when pressed into
“% AUTO” position.

5 4. LED Mode Indicators
Left LED illuminates during MANUAL mode.
Right LED illuminates when power is supplied to heater.
Right LED blinks on and off during SmartStart .
®
3 5. Setpoint Pushwheel
Smart Series ® Three-digit switch programs setpoint in AUTO mode. Right two digits program

% power in MANUAL mode.

6. Power On/Off Switch
Controls AC power to module.
6

Front Panel Digital LED Indicators

U.S. 800-626-6653  Canada 800-387-6600  dme@milacron.com  www.dme.net