Page 160 - Mold Bases & Plates 2020

w
z 168 Standard & Optional Mold Base Features z

Leader Pin Vents, Spring Pockets & Mold Strap Holes
S STANDARD SHIPPING oFFset (1)

5 5-DAY SHIPPING

7 7-DAY SHIPPING for quoting or Leader Pin Vents, which allow clamp plate
SHIPPING
11-DAY
ordering, sPecify:
trapped air to escape from the
Standard & Optional Mold Base Features | Leader Pin Vents, Spring Pockets and Mold Strap Holes
mold, are designed into all a-plate
❑ leader Pin Vents y B-plate
Leader Pin Vents (0.50 wide x 0.12 15-inch-and-wider series molds.
deep) can be machined in the When desired, they can be x .50 (4) pLaces wiDe x .12 Deep support plate
centereD on eacH sHouLDer BusHinG,
incLuDinG tHe oFFset BusHinG -
in top oF risers on eJector HousinG
For LeaDer pin Vent sLots
housing under the bushing location. specified on smaller molds.
LpV-xos LpV-x
(1) pLace (3) pLaces
Housing
View x-x section z-z
("B" HaLF oF moLD)
w

❑ spring Pockets Per customer specifications,
Quantity: __________________ any type of cavity and core
pockets can be finished.
Plate(s) with pockets: _________ See DME Mold Components
catalog for spring free lengths

and hole dimensions. ROD HOLE

FREE LENGTH

❑ mold strap Holes Machined holes will be for mounting
Provide desired positions and mold straps. Please provide desired
quantity (minimum 2). positions and quantity (minimum 2).
Quantity: __________________

Positions: __________________

U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net