Page 289 - Mold Bases & Plates 2020

Technical Reference
296

American Standard Mold Base Features

leader pins, vents & bushings sIze DIA lpxos lpx lpy ejector housing & Cover
88 0.750 3.000 3.125 3.125
812 0.750 5.000 5.125 3.125
Leader Pins and Bushings align both halves of 108 0.750 2.938 3.125 4.062 ejector housing Cover
W
the mold at the parting line. Leader Pin Vents, 1012 0.875 4.875 5.062 4.062
which allow trapped air to escape from the mold, 1016 0.875 6.938 7.125 4.062 For additional operator safety, SelectBase molds include an
are designed into all 15-inch-and-wider series 1020 0.875 8.938 9.125 4.062 ejector housing cover, except when a longer length ejector bar is
molds. When desired, they can be specified on 1112 0.875 4.938 5.125 4.562 selected. The perforated DME logo helps the operator to visually
smaller molds. 1114 0.875 5.938 6.125 4.562 determine if the ejector plate and ejector retainer plate are in
1118 0.875 7.938 8.125 4.562 the returned position. The cover is fastened on both sides with
z lp-XOs1 lp-X2 z 1123 0.875 10.688 10.875 4.562 5/16-18 button-head cap screws. Once again, DME is leading the
1212 1.000 4.625 4.812 5.000 industry into a safer work environment.
1215 1.000 6.125 6.312 5.000
lp1 lp2
OFFset (1) Offset (1) 1220 1.000 8.625 8.812 5.000 ejector housing
lp-y1 lp-y2 1223 1.000 10.375 10.562 5.000 DME offers a selection of housing types to fit application
1315 1.000 6.125 6.312 5.688
1318 1.000 7.375 7.562 5.688 demands. A one-piece welded housing is available for
1321 1.000 8.750 8.938 5.688 customers requiring maximum rigidity and robust durability.
lp-y3 lp-y4 1323 1.000 10.125 10.312 5.688 For maximum flexibility of configuration options, a three-piece
1326 1.000 11.375 11.562 5.688 housing is also available.
lp3 lp4 1329 1.000 13.125 13.312 5.688
1518 1.250 7.375 7.562 6.062
1524 1.250 10.250 10.438 6.062 EJECTOR HOUSING COVER TAPPED HOLES FOR
lp-X3 lp-X4 1529 1.250 13.125 13.312 6.062 (BOTH ENDS OF MOLD). FASTENING COVERS
”b” half of mold COVERS MOUNTED ON TO MOLD (8)
1616 1.250 6.375 6.562 6.562 OUTSIDE SURFACE OF MOLD
Technical Reference | American Standard Mold Base Features
ON ENDS OF EJECTOR
1620 1.250 8.375 8.562 6.562 HOUSING RISERS
1623 1.250 10.125 10.312 6.562
1626 1.250 11.375 11.562 6.562 MOUNTING HOLES
FOR FASTENING
1629 1.250 13.125 13.312 6.562 COVERS TO MOLD EJECTOR HOUSING
1635 1.250 16.125 16.312 6.562 (RISER)
EJECTOR RETAINER PLATE
1724 1.250 10.250 10.438 6.812 EJECTOR BAR
1729 1.250 13.125 13.312 6.812 Recommended
1818 1.250 7.375 7.562 7.562 Dimensions for Drilling 5/16-18 X 3/8 LONG UNC CLASS 3A
BUTTON HEAD CAP SCREW (8) PLACES
1820 1.250 8.375 8.562 7.562 and Tapping
1823 1.250 10.125 10.312 7.562 .44
TYP.
1826 1.250 11.375 11.562 7.562 .69
VIeW X-X C DIM/2 TYP.
("b" hAlF OF MOlD) 1829 1.250 13.125 13.312 7.562
C DIM
W clamp plate 1835 1.250 16.125 16.312 7.562 (RISER HEIGHT) A A
1924 1.250 10.250 10.438 8.312
A-plate
1929 1.250 13.125 13.312 8.312
y b-plate 1935 1.250 16.125 16.312 8.312 .257 DIA. TAP DRILL END OF MOLD
2424 1.500 10.062 10.250 10.250 .75 DEEP TO POINT
X .50 WIDe X .12 Deep 5/16-18 TAP UNC CLASS 2B
(4) plAces
centereD On eAch shOUlDer bUshInG, support plate 2429 1.500 12.938 13.125 10.250 .62 DEEP
InclUDInG the OFFset bUshInG -
In tOp OF rIsers On ejectOr hOUsInG (8) PLACES
FOr leADer pIn Vent slOts
2435 1.500 15.938 16.125 10.250
lpV-XOs lpV-X
(1) plAce (3) plAces NOTE:
ALL DIMENSIONS
housing ARE IN INCHES ENLARGED WITH EJECTOR
HOUSING COVER AND BUTTON
HEAD CAP SCREW SHOWN
sectIOn z-z
Clamp slots lifting holes
Type a
lifting hole diameters
press plAten
base size 0.875 plaTe ThiCkness 1.375
0.813 88-1118 1/2-13 Unc 1/2-13 Unc
0.625 1123-1524 5/8-11 Unc 5/8-11 Unc
nOte: 1529-1829 5/8-11 Unc 3/4-10 Unc
When this plate is 0.875 thick, the slots
will be machined through the thickness. 1835-2429 5/8-11 Unc 1"-8 Unc
Type b 2435 n/A 1"-8 Unc
press plAten
lifting holes
0.875 –X +X plate surface in
0.813 threAD sIze s T Lifting Holes can be used to install hoist rings for parting line direction
OFFset
0.625 MAX. ease of handling. Mold base can be configured only
1/2-13 1.00 1.38
lh2
lh3
Type C 5/8-11 1.25 1.75 with Lifting Holes which are appropriate for the
lh1
O
3/4-10 1.50 2.00 specific mold base size. Refer to the DME catalog
press plAten 1"-8 2.00 2.62 for a comprehensive selection of Hoist Rings. z
0.875
0.813
0.625
Type d –X +X plate surface in s t
parting line direction
OFFset MAX.
press plAten
lh1 lh2 lh3
O
0.875 z
0.625
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
s
t
MAX.