Page 43 - CFCM Sept-Oct-2020_Neat

There will be a total of two global winners. The first place winner will
receive a new Wilden Pro-Flo SHIFT Air Kit and Chem-Fuse Wet Kit. A
second place winner will receive a new Wilden Chem-Fuse Wet Kit.
A panel of judges will select the winners based on the visual trans-
formation of the pump, the quality and skill level of painting, and the
creativity of the paint design. The winner will be announced no later
than October 9.
www.psgdover.com/wilden/campaigns/paint-your-pump

FLEXIM introduces a New Solution
for Liquid Low Flow Measurement
FLEXIM says its new FLUXUS F721 XLF is a non-intrusive flowmeter the measuring device does not come in direct contact with the flowing
for applications where every drop counts. The new ultrasonic flow media, it is not subject to wear and tear, meaning drift readings and
measuring system is designed to provide precise measurement of high maintenance efforts are not required.
flow rates as low as 1 gph and below in small pipes with diameters The measuring transmitter is available in either aluminum or stain-
from 3/8 to two inches. As the clamp-on transducers are mounted on less-steel housing. Typical applications include chemical injection of
the outside of the pipe, meter installation and commissioning can be scale and corrosion inhibitors in the oil and gas industry, chemical
done without any pipework modifications or process interruptions. The dosing in wastewater treatment and measurement of low flow spray
external flow measurement works independently of the pipe wall paint lines in the automotive industry.
thickness and pressure ranges and does not cause pressure loss. As www.flexim.com

YOUR BEST FINISH STARTS WITH US!

Service and Spare Parts
Our Potential, Turn-Key Finishing Systems

Material Handling Innovations
Your Success Water and Wastewater Treatment Solutions

PHONE: (920) 743-6568 | WEBSITE: WWW.TTXINC.COM | E-MAIL: SALES@TTXINC.COM

www.cfcm.ca CAnADIAn FInISHInG & COATInGS MAnuFACTuRInG 43