Page 58 - StudyBook.pdf
P. 58
42 Chapter 1 • General Security Concepts: Access Control, Authentication, and Auditing
Figure 1.13 The Telnet Service Properties Page
As shown in Figure 1.14, select the Disabled setting and click Apply.
You will see that the state of the startup type has changed from
Manual to Disabled, as shown in Figure 1.15.
When you have successfully disabled the service, open a command
prompt window (type cmd at the Run line on the Start menu) and type
the following command: net start telnet server. If you have successfully
disabled the service, you should receive a message informing you that
the service is disabled.
www.syngress.com
