Page 13 - Scanreco - Instruction Manual: G5 rocket flex/pocket system
P. 13
13/33
5.4 Installing/changing battery
The G5 Rocket Flex Transmitter requires 3 re-chargeable AA cell batteries. Batteries
are included in the delivery but needs to be installed, follow the instructions below:
1. Remove the belt clip by unscrewing the top middle screws.
2. Unscrew the four screws holding the lid.
3. Remove the batteries.
4. Remove all dirt/dust to ensure no water can enter the unit.
5. Insert new batteries, mind the polarity!
6. Reattach the lid and the belt clip. Tighten the screws.
1 2 3
0,8 Nm
0,8 Nm
IMPORTANT!
If using standard non rechargeable batteries, do not use the charger.
