Page 24 - Parker- AC690+ integrator series drives

Communication Cards

AC690+ Integrator Series AC Drive

Description Features

The selection of available AC690+ communication “technol- • Communications cards can be factory installed into
ogy boxes” allow the flexibility to be connected to the most the drive, or purchased separately for installation on-site
common industry standard fieldbuses. • Dimensions H x W x D : 127mm x 76.2mm x 25.4mm
• LED indication of network and card status

Ethernet Communications Interface Profibus-DP Communications Interface
*Part Number: 6053/ENET/00 and 6055/ENET/00 *Part Number: 6053/PROF/00 and 6055/PROF/00
Supported Protocols Modbus/TCP and Ethernet IP Supported Protocols Profibus-DP
Communication Speed 10/100M bits/s Communication Speed Automatically Detected
Station Address Selectable via Software
Station Address Selectable via switch or Internet Explorer
Suitable for AC690+ version 1.x+
Suitable for AC690+ version 4.7+
CANopen Communications Interface
ControlNet Communications Interface *Part Number: 6053/CAN/00 and 6055/CAN/00
*Part Number: 6053/CNET/00 and 6055/CNET/00 Profile DS402
Supported Messages Polled I/O Supported Messages SDO, PDO, NMT, SYNC
Station Address Selectable via Software 20K, 50K, 125K, 250K, 500K, 1M bits/s
Communication Speed
Suitable for AC690+ version 4.7+ selectable
Station Address Selectable via Switch
Modus Plus Communications Interface Suitable for AC690+
*Part Number: 6053/MBP/00 and 6055/MBP/00
Supported Protocols Modbus Plus LonWorks
Cabling RS485 2 or 4 wire *Part Number: 6053/LON/00 and 6055/LON/00)
Communication Speed 1 M bits/s Supported Protocols LonWorks
Station Address Selectable via Software Delivered with a resource file compatible with
LonMaker software (or equivalent)
Suitable for AC690+ version 4.7+
Suitable for AC690+ HVAC Series version 5.1+
Devicenet Communications Interface
*Part Number: 6053/DNET/00 and 6055/DNET/00 SSD Link
*Part Number: 6053/LINK/00 and 6055/LINK/00)
DeviceNet Drive Profile Drive – Group 2 slave
Supported Protocols
only Supported Protocols Parker SSD LINK
DeviceNet Drive Profile Drive – Group 2 slave Cabling Fiber Optic
Station Address
only Network speed 2.7 MBaud
Suitable for Drives AC690+ Suitable for AC690+

RS485/Modbus Communications Interface Apogee P1 (HVAC Series only)
*Part Number: 6053/EI00/00 and 6055/EI00/00 *Part Number: 6053/APOG/00 and 6055/APOG/00)
Supported Protocols Modbus RTU, EI Bisynch ASCII Supported Protocols Apogee P1
Cabling RS485 2 or 4 wire Suitable for AC690+ HVAC Series
Communication Speed 300 to 115200 bits/s
Metasys N2 (HVAC Series only)
Station Address Selectable via Software
*Part Number: 6053/JMET/00 and 6055/JMET/00)
Suitable for AC690+ version 4.7+
Supported Protocols Johnson Controls N2
* Refer to page 39 for details of drive frame compatibility
Suitable for AC690+ HVAC Series version 4.6+

24