Page 4 - Parker - Series D1VW, B style 91 Design

Bulletin HY14-2536-M1/US Directional Control Valves
Model Code Series D1VW, B Style

Standard Valves

D 1V
Directional Basic Valve Actuator Spool Style Seal Solenoid Voltage
Control Valve

NFPA D03 Code Description Code Description
CETOP 3 W* Solenoid, A** 24/50 VAC
DIN NG6 Wet Pin, D 120 VDC
Screw-in G 198 VDC
HW* Reversed Code Description J 24 VDC
Wiring
N Nitrile K 12 VDC
* Valve schematic symbols are per NFPA/ANSI stan- V Fluorocarbon L 6 VDC
dards, providing flow P to A when energizing solenoid E* EPR
A. Note operators reverse sides for #008 and #009 N*** 220/50 VAC
spools. See installation information for details. To * Contact HVD for P*** 110/50 VAC
configure per DIN standards (A coil over A port, B availability. Q** 100/60 VAC
coil over B port) code valves as D1VHW***. QD 100/60 - 100/50 VAC
R 24/60 VAC
Code Symbol Code Symbol T 240/60 - 220/50 VAC
A B A B U 98 VDC
001 011 Y 120/60 - 110/50 VAC
P T P T Z 250 VDC
A B A B
002 014 ** High Watt only
*** Explosion Proof only.
P T P T
A B A B Code Description Symbol
003 015
B* Single solenoid, 2 position, spring offset. b A B
P T P T
A B A B P to A and B to T in offset position.
004 016 P T
C Double solenoid, 3 position, b A B a
P T P T
A B A B spring centered.
005 020* P T
D† Double solenoid, 2 position, detent. b A B a
P T P T
A B A B
006 026* b P T A B
E Single solenoid, 2 position, spring centered.
P T P T
A B A B P to B and A to T when energized.
007 030** b P A T B
F‡ Single solenoid, 2 position. Spring offset,
P T P T
A B A B energized to center. Position spool spacer on
00 8*, 081 A side. P to A and B to T in spring offset position. P T
009** A B a
P T P T H* Single solenoid, 2 position, spring offset.
A B A B
010 082 P to B and A to T in offset position. P T
A B a
P T P T K Single solenoid, 2 position, spring centered.
* 008, 020 & 026 spools have closed crossover. P to A and B to T when energized.
P T
** 009 & 030 spool have open crossover. A B a
See Universal Spool Chart for other spool options. M‡ Single solenoid, 2 position, spring offset,
energized to center position. Spool spacer on
B side. P to B and A to T in spring offset position. P T
* 020, 026 and 030 spools only.
† 020 and 030 spools only.
‡ High Watt only.

Bold: Designates Tier I products and options.
Non-Bold: Designates Tier II products and options.
These products will have longer lead times.
Bul HY14-2536-M1.indd, dd
1 Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio, USA