Page 42 - Parker - AC890/AC890PX series

Accessories

AC890/AC890PX Series

Mounting and Wiring

LA471585 I/O Terminal Interface
Building your own system enclosure? Let Parker SSD provide
the necessary pre-engineered hardware to save you time and
expense. Our installation kits and components come with
guaranteed compatibility with the AC890 drives. All from a single
source: Parker SSD Drives.

Ventilation Components

The I/O Terminal Interface Module saves time and provides for
a clean panel layout when used with the SSD AC890 series
drive. The module is mounted on DIN rail and connected to the
X12, X13, X14, and X15 I/O connectors on the AC890. With this
module, 15 I/O points are accessible through push-type terminals,
eliminating the need for a screwdriver and any concerns about
loose wiring. For multi-drive systems, the interface modules can
be mounted side by side, and with the included keyed jumper,
will share Coast Stop and Program Stop commands from the
lead drive, as well as the 24VDC auxiliary supply. If modules are
not to be mounted directly adjacent, there is an optional 2 meter
bus jumper cable available.
Parker SSD Drives also offers pre-made cables in three lengths
for easy connection to the AC890 drive. See part numbers in
table below.

Part Number Description
LA468430U003 Installation kit for 890CS/CA
LA468430U103 Installation kit for 890CD, Frames B-D
LA468430U203 Installation kit for 890SD, Frames B-D
Ventilation duct kit, 1 meter exhaust duct, one
8905/DUCTKIT/00
190 CFM fan kit. Frame B-D
Ventilation duct fan, 190 CFM, with flange
8905/DUCTFAN/00
(additional or replacement fan for duct kit)
LA466717U004 Exhaust duct kit, Frame E
LA466717U003 Exhaust duct kit, Frame F
AC890 air ducting components make easy work of cabinet Shield Grounding Clamp 8 mm (One included
building when force ventilation is to be used. The exhaust duct, CI465892U008 with drive)
supplied in 1 meter sections, is mounted to the top of the CI465892U014 Shield Grounding Clamp 14 mm
AC890 heatsinks and includes a 190 CFM fan. This arrangement CI465892U020 Shield Grounding Clamp 20 mm
provides a very effective means of cooling by drawing air directly
through the drives’ heat sinks and out of the air outlets which CI468595U015 Dsub-15 pin to discrete terminal strip (in shell)
can be flex-ducted out of the cabinet. See part numbers in table VM15 Breakout Module - Dsub 15 to DIN rail terminal
to right. strip
LA471585 I/O terminal interface module, DIN rail mount

42