Page 2 - Parker - Flo-Pac Filter Cartridges

®
Flo-Pac Filter Cartridges

SPECIFICATIONS Maximum Recommended Flow Rate and Pressure Drop Formulas
Filtration Ratings Operating Conditions Flow Rate (gpm) = CleanΔP x Length Factor
95% at 0.5μm, 1μm, 5μm, 10μm, 20μm, Temperature: 250°F (121°C) Viscosity x Flow Factor
30μm, and 60μm pore sizes Differential Pressure: 70psi (4.8bar) Clean ΔP = Flow Rate x Viscosity x Flow Factor
Length Factor
Materials of Construction Change Out ΔP: 35psid (2.4bar)
Filter Media: FP Flow Factor
Flow Rate per Single Length Cartridge:
Phenolic impregnated cellulose (psid/gpm @ 1cks) FP Length Factors
300 Series 7gpm
Core: ETP steel 500 Series 50gpm Rating Flow Style Length
End Caps: ETP steel 600 Series (3 ½ in. ID) 50gpm (μm) Factor Factor
9
600 Series (1 ⁄ 16 in. ID) 35gpm 0.5 0.0260 FP310 1.0
Sleeve: 700 Series 50gpm
300 series - Polypropylene 1 0.0170 FP320 2.0
600 & 700 series - ETP steel Dimensions 5 0.0020 FP329 3.0
300 Series 10 0.0018
Adhesive: Thermosetting PVC FP330 3.0
5
2 ½ in. OD x 1 in. ID x 9 ⁄ 8 in., 20 0.0010
End Seals: 19 ¾ in., 29 ¼ in., 29 ⁄ 8 in, 40 in. FP340 4.0
5
300 & 700 Series–Buna-N gaskets, 600 500 Series 30 0.0009 FP518 3.3
Series–Buna-N gaskets/grommets, 500 4 ½ in. OD x 1 ¾ in. ID x 18 in. 60 0.0005
Series–fi ber gaskets 600 Series FP614 3.6
6 ¼ in. OD x 3 ⁄ 12 , or 1 ⁄ 16 in. x 14 ⁄ 8, 29 FP629 7.2
9
1
3
Packaging or 43 ⁄ 8 in. long
3
300 Series FP644 10.8
700 Series
310–24/carton (12 lb ≈ shipping wt) FP718 6.5
6 ¼ in. OD x 2 ⁄ 8 in. or 2 ⁄ 8 in. ID x 18, 36,
5
1
320–12/carton (12 lb ≈ shipping wt) or 54 in. long
330–12/carton (18 lb ≈ shipping wt) FP736 13.0
340–12/carton (24 lb ≈ shipping wt) FP754 19.5
Liquid Particle Retention Ratings (μm)
500 Series @ Removal Effi ciency of:
518–6/carton (14 lb ≈ shipping wt) ß=5000 ß=1000 ß=100 ß=20 ß=10 Notes:
1. Clean ΔP is psi differential at start.
Cartridge
600 Series Absolute 99.9% 99% 95% 90% 2. Viscosity is centistokes. Use
Conversion Tables for other units.
614–6/carton (20 lb ≈ shipping wt) FP-0.5 12 10 3 0.5 <.0.5 3. Flow Factor is ΔP/GPM at 1cks for
10 in. (or single).
629–4/carton (26 lb ≈ shipping wt) FP-1 15 12 6 1 <1.0 4. Length Factors convert fl ow or ΔP
644–4/carton (40 lb ≈ shipping wt) from 10 in. (single length) to
FP-5 30 20 9 5 3.5 required cartridge length.
700 Series FP-10 50 35 18 10 7
718–6/carton (20 lb ≈ shipping wt)
736–4/carton (26 lb ≈ shipping wt) FP-20 90 70 40 20 12
754–4/carton (39 lb ≈ shipping wt) FP-30 100 85 50 30 21
FP-60 200 150 90 60 45
Ordering Information
— —
FP
Cartridge Code Outside Diameter Length Micron Rating (μm) Inside Diameter Seal Material Body
CODE DESCR. CODE INCHES (Series) CODE INCHES (Series) 0.5 CODE INCHES (SERIES) CODE DESCRIPTION CODE DESCRIPTION
FP Flo-Pac 3 2 ½" (300) 10 9 5 ⁄ 8 " (300) 1 None 1" (300) None Buna-N Gaskets None Metal (500, 600, 700 Series)
5 4 ½" (500) 5 None 1 ¾" (500) Vellumoid 1 Polypro (300 Series)
14 14 3 ⁄ 8 " (600) A
(300, 600, 700 Series)
6 6 ¼" (600) 10 None 3 ½" (600) M Metal (300 Series)
18 18" (500, 700)
7 6 ¼" (700) 20 None 2 5 ⁄ 8 " (700) B Fiber (500 Series Only)
20 19 ¾" (300) N No Body
9
30 1 1 ⁄ 16 " (600)
29 29" (600) C Cork (700 Series Only)
60 8 2 1 ⁄ 8 " (700)
29 29 ¼" (300) Buna-N Grommets
G
30 29 5 ⁄ 8 " (300) (600 Series 1 9 ⁄ 16 " ID)
V Viton ®
36 36 (700)
40 40 (300)
44 43 3 ⁄ 8 " (600)
54 54 (700)
Specifi cations are subject to change without notifi cation. © 2010 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - North America
All Rights Reserved
Fulfl o is a registered trademark of Parker-Hannifi n Corporation
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
DS_IP_Flo-Pac Rev. A
41