Page 2 - Parker -DuraBond

P. 2

DurABOND ™

economical filtration with high-strength, thermally bonded depth cartridges

PERFoRMancE attRiBUtEs
DBC flow factors Flow Rate and Pressure Drop Formulae:
aqueous
Service PSID/ Flow Rate (gpm) = Clean ΔP x Length Factor
GPM per 10-in Viscosity x Flow Factor
Rating (µm) cartridge
1 0.109 Clean ΔP = FlowRate x Viscosity x Flow Factor
3 0.087 Length Factor
5 0.073
10 0.058 notes:
25 0.031 1. Clean ΔP is PSI differential at start.
50 0.022 2. Viscosity is centistokes. Use Conversion Tables for other units.
75 0.015 3. Flow Factor is ΔP/GPM at 1cks for 10 inch (or single).
100 0.012 4. Length Factors convert flow or ΔP from 10 inch (single length) to
required cartridge lenth.
oRDERinG inFoRMation

DBC M

Micron Rating Nominal Length End Cap Conﬁguration Seal Material
CODE (μm) CODE INCH (MM) CODE DESCRIPTION CODE DESCRIPTION

1 1 9-4 9-3/4 (248) None DOE w/o gasket None No gasket (DOE Only)
3 3 10 10 (254) AR 020 O-ring (recessed) N Poly Foam Gasket with
5 5 19-4 19 1/2 (495) DO DOE with gaskets Collars (DO Only)
10 10 20 20 (508) LL* 120 O-ring (Both Ends)* E EPR
15 15 29-4 29 1/4 (743) LR * 120 O-ring/ Recessed* N Buna N
20 20 30 30 (762) OB Std. Open End/Polypro S Silicone
30 30 39-4 39 (991) Spring End Closed T PFA Encapsulated
®
40 40 40 40 (1016) PR* 213 O-ring/ Recessed* Viton (222,226 O-ring only)
®
70 70 SC 226 O-ring/Flat Cap V Viton
90 90 SF 226 O-ring/ Fin N Poly Foam Gasket (DO Only)
100 100 TC 222 O-ring/Flat Cap
TF 222 O-ring/Fin
TX 222 O-ring/Flex fin
XA DOE w/Core Extender
XB EXT. Core Open End/Polypro
Spring Closed End * Available only in 9 3/4” (9-4) and 19 1/2” (19-4) lengths.

tEcHnical sUPPoRt anD PRoDUct inFoRMation
Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right
solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information
on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.
Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and
Beverage, Coatings and Inks, Process and Chemical industries.
DISTRIBUTED BY:

Process Advanced Filtration Division
2340 Eastman Avenue
Oxnard, California, USA 93030
Toll Free: +1 877 784 2234
Specifications are subject to change without notification. Phone: +1 805 604 3400
Fulflo ® is a trademark of Parker Hannifin Corporation. Fax: +1 805 604 3401
Viton ® is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
© 2007 Parker Hannifin Corporation. PAFsales@parker.com
www.parker.com
SPEC-DB-FB Rev. G 9/07 62

1 2