Page 2 - Parker - Polyflow-G

Polyflow -G
®

Specifications Performance Attributes
Materials of Construction Water Flow rates, Typical *
Depth.media. :. Polypropylene. 0.2µm.. 4.2gpm/psid.(23.3lpm/00mbar). 5.0µm.. 70.0gpm/psid.(384.2lpm/00mbar).
Support.layers. :. Polypropylene. 0.5µm.. .0gpm/psid.(60.4lpm/00mbar) 0.0µm.. 70.0gpm/psid.(384.2lpm/00mbar).
Structure. :. Polypropylene .0µm.. 33.0gpm/psid.(8.lpm/00mbar). 30.0µm.. 70.0gpm/psid.(384.2lpm/00mbar).
3.0µm.. 70.0gpm/psid.(384.2lpm/00mbar).
All. components. are. thermally. bonded. to. ensure.
integrity.and.to.reduce.extractables. *Per.0-inch.(250.mm).cartridge.equivalent.

Nominal Filter Ratings 10-inch (250mm) Cartridge
0.2µm,.0.5µm,.µm,.3µm,.0µm,.and.30µm
Water Flow Rate (lpm)

Effective Filtration Area 0 4 8 12 16 20 24 28
.
3.6ft² (0.33.m²).per.0".(250mm).cartridge 1.2
80
0.2µm
Cartridge Extractables
NVR.<.35mg.per.0".(250mm).cartridge 1
60
Biological Safety 0.8
All.components.meet.USP.specifications.for.
Class.VI-2ºC.Plastics.criteria. 0.5µm
Differential Pressure (psid) 0.6 40 Differential Pressure (mbar)
Maximum Differential Pressure/
Temperature
Forward:....80psid.(5.5bar).@.75ºF.(24ºC) 0.4
Reverse:.....40psid.(2.8bar).@.75ºF.(24ºC) . 1.0µm 20
5psid.(.0bar).@.40ºF.(60ºC).
0.2
.
Maximum Operating Temperature 3, 5, 10 & 30µm
60ºF.(7ºC) 0 0
0 1 2 3 4 5 6 7 8
Water Flow Rate (gpm)

Ordering Information
Each.cartridge.is.identified.with.a.product.number,.pore.size.and.lot.number.for.traceability.

PG 0

Gasket/O-Rings
Style End Fitting Nominal Length Filter Rating Gasket Thickness
CODE DESCRIPTION CODE DESCRIPTION CODE LENGTH CODE MICRON CODE MATERIAL CODE DESCRIPTION
0
Buna N
1 None 0 DOE (CUNO®) 05 5" (125mm) 002 0.2µm (Standard) 1 0.200" (5mm)
A 1/2" Shortened 1 DOE 10 10" (250mm) 005 0.5µm 1 EPDM 2 0.125" (3mm)
on 222 Fitting 2 226/Flat 20 20" (500mm) 010 1.0µm 2 Silicone 4 (1) 0.200" (5mm) &
3 222/Flat 30 30" (750mm) 030 3.0µm 4 Viton ® (1) 0.125" (3mm)
6 020/Internal/Flat 40 40" (1,000mm) 050 5.0µm 5* FEP Encapsulated N None
7 226/Fin 100 10.0µm Viton ®
8 222/Fin 300 30.0µm 6* FEP Encapsulated
G 120/Internal/Recessed End cap Silicone
H 213/RecessedEnd cap (Ametek) N None
R 222/Recessed End cap *O-Rings only
Polyflow.is.a.registered.trademark.of.Parker.Hannifin.Corporation. ©.2008.Parker.Hannifin..
Viton.is.registered.trademark.of.E.I..DuPont.de.Nemours.&.Co.,.Inc. Process.Advanced.Filtration.Inc.
Cuno.is.a.registered.trademark.of.Cuno.Inc. All.Rights.Reserved
SPEC.-PG.Rev.H.04/08.

ENGINEERING.YOUR.SUCCESS.