Page 22 - Clippard - Control Valves

SPECIALTY COMPONENTS

Multi-Pin Air Indicator Vacuum Gauge
Plunger type (when extended 7-pin color display signals “on”) Gauge measures
-15
-20 -10 pneumatic vacuum
-0.6 -0.4
VACUUM pressure. Mounting
1.863 -25 -0.8 -0.2 -5 0.750
bracket included.
bar
-1.0 100XkPa 0
in
-30
Hg 0
0.833 0.132
15/32-32 thd. 1.000
#10-32 15/32-32 thd. 1/8" NPT vent 9/16" hex. Range: Scale reading from
thd. inlet vent inlet 0.385
0 to 30” Hg. and 0 to -1 bar 0.665
#6-32 thd.
0.437 Construction: Nickel-plated steel
dia. 1.156 1/8-27 NPT
case. Plastic face. Dial shows 1.600 #10-32 female thd.
two ranges; Hg in black. bars
0.968
0.625 dia. 1.250
1.218 0.625 dia. in red. Built-in pressure snubber.
1.500
Medium: Air Only Ports: Connection located at rear is double threaded O.D. - male
Input Pressure: 150 psig max. thread 1/8” NPT, I.D. - tapped for #10-32 fitting
Minimum Actuation Pressure: 15 psig approx. Mounting: Stud mount using 1/8” NPT center stud or panel mount
RoHS using the zinc plated steel bracket supplied.
Response: Approx. 10 milliseconds @ 50 psig
Filtration: 40 micron recommended Part No. Description
VG-30 Vacuum Gauge
Mounting: IND-3: Panel mount in hole. #15/32-32 nut and lockwasher
provided; IND-3P: Direct mount into 1/8” NPT hole
Pressure Gauges
Maximum Panel Thickness: 3/16”
Part No. Description
IND-3-(color) Multi-Pin Air Indicator, #10-32 40 50 60
30 3 4 70 0.843
IND-3P-(color) Multi-Pin Air Indicator, 1/8” NPT 20 2 5 80
1 6
GN-Green, WH-White, RD-Red, YL-Yellow 10 0 PSIG 7 90 1.625 dia.
kg/cm 2
0 100 1/8" NPT
0.656
#10-32
1.600 dia. female thd.
Single Pin Air Indicator Gauge measures pneumatic system pressure. Stud mounted.
Plunger type (when extended white pin display signals “on”) Range: Scale reading from 0 to 100 psig and 0 to 6.9 bar
nut (2) supplied Construction: Steel case. Plastic face. Dial shows two ranges; psig in
0.062
black. Bars in red. Built-in pressure snubber.
1/4-40 thd. 5/16" hex.
#10-32 thd.
Ports: Connection located at rear is double threaded O.D. - male
thread 1/8” NPT; I.D. - tapped for #10-32 fitting
0.080 dia.
Mounting: Direct with 1/8” NPT
0.055 0.438 0.187 1/4" hex. Part No. Description
PG-101-BK Pressure Gauge, Black Case
Part No. Description PG-101-NP Pressure Gauge, Nickel-Plated
IND-1-WH Single Pin Air Indicator
#10-32 thd.
50
40 60
30 70
3 4
2 5
20 80 0.843 0.125
0.750 1 6 1.780 dia.
0.080 dia. 10 0 PSIG 7 90 1.000
kg /cm 2
0 100
0.375
0.656
#6-32 thd.
0.055 0.465 0.160 1/4" hex.
1.156 1/8" NPT
1.630 dia. #10-32
Part No. Description Gauge measures pneumatic system pressure. female thd.
IND-1M-WH Single Pin Air Indicator
Mounting bracket included.
Medium: Air Only Input Pressure: Scale reading from 0 to 100 psig and 0 to 6.9 bar
Input Pressure: 150 psig max.
Construction: Nickel-plated steel case. Plastic face. Dial shows two
Minimum Actuation Pressure: 12 psig approx. ranges; psig in black. Bars in red. Built-in pressure snubber.
Response: Approx. 10 milliseconds @ 50 psig
Ports: Connection located at rear is double threaded O.D. - male
Filtration: 40 micron recommended thread 1/8” NPT I.D. - tapped for #10-32 fitting
Mounting: IND-1-WH: Panel mount 1/4 dia. hole. 1/4-40 thd. Mounting: With zinc plated steel bracket supplied
nuts provided. IND-1M-WH: Direct mount into #10-32 port
Part No. Description
Maximum Panel Thickness: 3/16”
PG-100 Pressure Gauge
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com 168