Page 1 - Colder Products Company - DrumQuik PUR Dispensing System for Professional High Purity Chemical Management

DrumQuik PUR

®

Dispensing System for Professional,

High Purity Chemical Management

DrumQuik PUR is an easy-to-use product for extracting high purity chemicals from rigid
®
containers (jerry cans, drums and IBCs) using common pumps within a closed-system design.
The integrated flare outlet fitting allows easy connections to chemically resistant tubing
such as PFA or FEP. The system minimizes chemical exposure and promotes employee and
environmental safety. DrumQuik PUR is ideally suited to cost-sensitive one-way/single-use
applications and can be disposed of, recycled along with the container or reused with a new
container. DrumQuik PUR products are manufactured in a cleanroom and double bagged to
maintain purity until ready for use.

FEATURES BENEFiTS

Quick connect/disconnect Allows faster container change-outs
All plastic construction No metallic corrosion/contamination
Applications:
Automatic shutoff valve Stops flow when disconnected
• Acids, caustics and
Cleanroom manufactured Assures high level of purity
solvent delivery
Disposable drum insert Minimizes chemical exposure & contamination
• Pharmaceutical chemical

Specifications handling

Pressure: • Semiconductor wet
Uncoupled: Vacuum to 45 psig (3.1 bar) process
Coupled: Vacuum to 22 psig (1.5 bar)
• Flat panel production
Temperature:
Drum insert: -20° to 120°F (-29° to 49°C) • Photovoltaic cell
Coupler: 0° to 120°F (-18° to 49°C)
manufacturing
Materials:
Drum insert & dip-tube: • Laboratory chemical
Virgin polyethylene (HDPE) handling
Shipping plug:
Virgin polyethylene (HDPE) DrumQuik PUR
®
Coupler: Virgin PVDF Flow Performance
Spring (coupler only):
Virgin PEEK UHP (PPS or Teflon encapsulated 20 0.0 8 15 23 30 38 45 53 61 68 76 (lpm)
®
316 stainless steel optional) 18 124.1
Seals: 16 110.3
96.5
14
®
Coupler seals: FKM (Simriz UHP FFKM 12 82.7
Perfluoroelastomer optional) Pressure Drop (psid) 10 C v ~3.6 68.9
Bung seal: Polyolefin (POE) (EPDM or FKM 8 K v ~51.7 55.2
41.4
6
optional) 4 27.6
Shipping plug seal: EPDM (FKM optional) 2 13.8 (kPa)
Torque specifications: 0 2 4 6 8 10 12 14 16 18 20
2" Buttress – 20ft-lbs (27 N-m) Flow Rate (gpm)
Shipping plug – hand tight Note: As tested with water.
NOTE: The torque specifications listed above are general recommendations
which may need to be adjusted + or – depending on specific application.