Page 2 - Parker - Clearflow

ClEArflOW ™

Serial layers of depth media and membrane provide long lasting protection of final filters

PERFoRMancE attRiBUtEs
SG- with glass fiber depth matrix
Typical Water Flow Rates* Water Flow Rate (lpm)
SG- with glass fiber depth matrix 0 4 8 12 16
0.2 µm 4.0 gpm/psid (21.96 lpm/100 mbar) 2.5
0.5 µm 7.5 gpm/psid (41.18 lpm/100 mbar) 150
0.8 µm 8.5 gpm/psid (46.67 lpm/100 mbar) 2

SP- with Polypro fiber depth matrix 1.5
0.2 µm 2.0 gpm/psid (10.98 lpm/100 mbar) 0.05 μm 100
0.5 µm 3.1 gpm/psid (17.02 lpm/100 mbar) Differential Pressure (psid) 1 Differential Pressure (mbar)

* For fluids with viscosity of 1cP, per 10 inch (250 mm) 0.2 μm 50
cartridge equivalent 0.5 1.0 μm

0 0
0 1 2 3 4 5
Water Flow Rate (gpm) at 1cP @ 68° F (20° C)

oRDERinG inFoRMation
Each cartridge is identified with a product number, pore size and lot number for traceability.

0

Prefilter Layer End Fittings Filter Rating Gasket/O-Rings Thickness
CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION (Gaskets Only)
®
SG Glass Fiber 0* DOE (CUNO ) 002 0.2 µm 0 Buna N CODE THICKNESS
SP Polypropylene 1* DOE 005 0.5 µm 1 EPDM 1 0.200" (5 mm)
2 226/Flat 008 0.8 µm 2 Silicone 2 0.125" (3 mm)
Insert Style 3 6* 222/Flat 4 5* Viton ® 4 (1) 0.200" (5mm) &
020/Internal/Flat
FEP-Encapsulated
CODE DESCRIPTION 7 226/Fin Nominal Length Viton ® N (1) 0.125" (3 mm)
None
1 No Insert (Standard) 8 222/Fin CODE LENGTH 6* FEP-Encapsulated
5 Encapsulated 316 SS G* 120/Internal/Recesed Endcap 10" 10" (250 mm) Silicone Grade
®
6 Encapsulated Polysulfone H* 213/Recessed Endcap (Ametek ) 20" 20" (500 mm) N None
R* 222/Recessed Endcap 30" 30" (750 mm) *O-Rings only CODE TYPE
40"
40" (1000 mm)
B
Biological
*Not available in Biological Grade G General
tEcHnical sUPPoRt anD PRoDUct inFoRMation
Parker provides our customers with unsurpassed product consistency and cost efficiency. Our experienced professionals can help you select the right
solution for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information
on product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.
Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and
Beverage, Coatings and Inks, Process and Chemical industries.
DISTRIBUTED BY:

Process Advanced Filtration Division
2340 Eastman Avenue
Oxnard, California, USA 93030
Specifications are subject to change without notification. Toll Free: +1 877 784 2234
© 2007 Parker Hannifin Corporation Phone: +1 805 604 3400
Clearflow is a trademark of Parker Hannifin Corporation. Fax: +1 805 604 3401
TM
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
®
Ametek is a registered trademark of Ametek Calibration Instruments PAFsales@parker.com
®
www.parker.com
SPEC-SGSR-FB Rev. H 9/07 14