Page 2 - Parker - Steelflow cartridges

™
Steelfl ow Cartridges

Specifi cations Performance Attributes

Materials of Construction Water Flow Rate Curves
Media: 316L Stainless Steel Temperature: 75ºF (24ºC)
Support Layers: 316L Stainless Steel
Water Flow Rate (lpm)
Structure: 316L Stainless Steel 0 50 100 150 200
12
0.8
Maximum Differential Pressure
10 0.7
Forward:
250psid (17bar) @ 700°F (371°C) 8 0.5 µm 0.6
Reverse: 1 µm 0.5
50psid (3.4bar) @ 700°F (371°C) Differential Pressure (psid) 6 0.4 Differential Pressure (bar)

Chemical Compatibility 4 3, 5, 10, 20, 40 µm 0.3
0.2
Steelfl ow is compatible with all chemicals
2
that may be processed using stainless steel. 0.1
0 0.0
Operating Temperature Range 0 10 20 30 40 50 60
Water Flow Rate (gpm)
Maximum: +700°F (371°C)
Minimum: -450°F (-268°C) Air Flow Rate Curves
Air Temperature: 75ºF (24ºC)
Inlet Pressure: 15 psia (1 bar)
Effective Filtration Area
1.8ft² (0.17m²) per nominal 10 inch (250mm) Air Flow Rate (slpm)
cartridge. 0 600 1200 1800 2400 3000 3600 4200
3.0
0.18
Regenerable 2.5
Differential Pressure (psid) 1.5 3, 5, 10, 20, 40 µm 0.09 Differential Pressure (bar)
May be cleaned chemically, mechanically 0.15
or thermally. 2.0 0.5, 1 µm 0.12

1.0

0.5 0.06
0.03
0 0.00
0 30 60 90 120 150
Air Flow Rate (scfm)

Ordering Information

21 - 10 — —

End Fitting Nominal Length Filter Rating O-Ring Gaskets
CODE DESCRIPTION CODE LENGTH CODE MICRON CODE MATERIAL CODE THICKNESS
1 DOE 10 10˝ (250mm) 005 0.5μm 0 Buna-N 1 0.200˝ (5mm)
2 226/Flat 20 20˝ (500mm) 010 1.0μm 1 EPDM 2 0.125˝ (3mm)
3 222/Flat 30 30˝ (750mm) 030 3.0μm 2 Silicone (1) 0.200˝ (5mm)
4
7 226/Fin 40 40˝ (1000mm) 050 5.0μm 4 Viton ® (1) 0.125˝ (3mm)
8 222/Fin 100 10.0μm FEP-Encapsulated
5* N No Gasket
Viton ®
A SOE w/1˝ NPT 200 20.0μm
FEP-Encapsulated
B SOE w/1.5˝ NPT 400 40.0μm 6* Silicone
N None
*O-Rings Only

Specifi cations are subject to change without notifi cation. © 2010 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - North America
All Rights Reserved
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
DS_IP_Steelfl ow 02/12 Rev. A

104