Page 45 - Parker - Heavy Duty Hydraulic Cylinders
P. 45
Catalog HY08-1114-4/NA Heavy Duty Hydraulic Cylinders
Specifications / Mountings – Large Bore Series 3H
Standard Specifications
• Heavy Duty Service • Piston Rod Diameter – 4.500" through 10.000"
• Standard Construction – Square Head – • Mounting Styles – 12 standard styles at various
Tie Rod Design application ratings
• Nominal Pressure – 3000 psi 1 • Strokes – Available in any practical stroke length
• Standard Fluid – Hydraulic Oil • Cushions – Optional at either end or both ends
• Standard Temperature – -10°F to +165°F 2 of stroke
• Bore Sizes – 10.00" through 20.00" • Rod Ends – Three Standard Choices – Specials
(Larger sizes available) to Order
1 If hydraulic operating pressure exceeds 3000 psi, send application data for engineering evaluation and recommendation.
See Section E for actual design factors.
2 See Section E for higher temperature service.
In line with our policy of continuing product improvement, specifications in this catalog are subject to change.
Available Mounting Styles B
Tie Rods Extended Head End Tie Rods Extended Cap End Tie Rods Extended Both Ends Head Rectangular
Style TB Style TC Style TD Style JJ
10.00"- 10.00"- 10.00"- 10.00"-
14.00" 14.00" 14.00" 14.00"
(NFPA MX3) (NFPA MX2) (NFPA MX1) (NFPA ME5)
Head Square Flange Cap Rectangular Cap Square Flange Side Lug
Style JB Style HH Style HB Style C
10.00"- 10.00"- 10.00"- 10.00"-
20.00" 20.00" 20.00" 14.00"
(NFPA MF5) (NFPA ME6) (NFPA MF6) (NFPA MS2)
Cap Fixed Clevis Head Trunnion Cap Trunnion Intermediate Fixed Trunnion
Style BB Style D Style DB Style DD
10.00"- 10.00"- 10.00"- 10.00"-
20.00" 14.00" 14.00" 20.00"
(NFPA MP1) (NFPA MT1) (NFPA MT2) (NFPA MT4)
Double Rod Cylinders
Style KC Shown
Most of the
above illustrated
mounting styles
are available
in double rod
cylinders.
35 Parker Hannifin Corporation
Industrial Cylinder Division
www.parker.com/cylinder Des Plaines, Illinois USA