Page 74 - Parker - Heavy Duty Hydraulic Cylinders

Catalog HY08-1114-4/NA Heavy Duty Hydraulic Cylinders
Double Rod Models – Large Bore Series 3H

Double Rod Cylinder
Style K
ZM + 2 x STROKE
ZB + STROKE
Y P + STROKE
WF LG + STROKE
EE

ØMM

G G K
Rod End #1 SW SU SU SW Rod End #2
XS SS + STROKE

Mounting Styles Mounting Styles Dimension Shown on Bore Rod Rod Add 2X
for Single Rod for Corresponding This Page Supplement Ø Code Ø Stroke
Models Double Rod Models Dimensions on Pages ZM
1
Listed Below 1 4.500 18.00
TB KTB 53 2 7.000 19.12
TD KTD 53 10.00 3 5.000 18.50
JJ KJJ 54/55 4 5.500 18.50
JB KJB 56 1 5.500 20.88
C KC 59 12.00 2 8.000 22.50
D KD 61 3 7.000 21.50
DD 2 KDD 63 1 7.000 22.63
1 If only one end of these Double Rod Cylinders is to be cushioned, be 14.00 2 10.000 24.63
sure to specify clearly which end this will be. 3 8.000 23.63
2 Specify XI dimension from rod end #1. 1 8.000 26.13
16.00 3 9.000 26.63
4 10.000 27.13
1 9.000 29.63
18.00 3 10.000 30.13
20.00 1 10.000 32.63

How to Use Double Rod Cylinder
Dimension Drawings
To obtain dimensioning information on a double rod provide the additional information needed to completely
cylinder, first select the desired mounting style and refer dimension a double rod cylinder model.
to the corresponding single rod cylinder model shown on On a double rod cylinder where the two rod ends are
the preceding pages. (See table above.) After you have different, be sure to clearly state which rod end is to be
determined all necessary dimensions from that drawing, assembled at which end. Port position 1 is standard. If
turn back to this page and supplement those dimensions other than standard, specify pos. 2, 3 or 4 when viewed
with additional ones from the drawing above and table at from rod end #1 only. See port position information in
right. These added dimensions differ from, or are in Section E.
addition to, those shown on the preceding pages and

64 Parker Hannifin Corporation
Industrial Cylinder Division
www.parker.com/cylinder Des Plaines, Illinois USA