Page 2 - Parker - PROCLEAR MR filters
P. 2

PROPOR MR Filters




       Specifications


       Materials of Construction          Effective Filtration Area (EFA)    Quality Standards
                                                                      2
                                                              2
        Core:           Polypropylene    10¨ (250 mm):   0.50  m    (5.38 ft )  Pharmaceutical grade products are
                                                                      2
                                                              2
        Sleeve:         Polypropylene    K Size:        0.24  m    (2.58 ft )  manufactured in accordance with cGMP,
                                                              2
                                                                      2
        End Caps:       Nylon            A Size:        0.19  m    (2.09 ft )  100% flushed with pharmaceutical purified
                                                                      2
                                                              2
        Filtration Membrane:   Polyethersulphone  B Size:    0.10  m    (1.03 ft )  water and integrity tested prior to despatch.
                                                                      2
                                                              2
        Prefilter Membrane:   Polyethersulphone  E Size:    0.05  m    (0.49 ft )  A sample of each lot is tested to demonstrate
                                                                             conformity to validated claims.
       Filter Cartridges                           Autoclave                      Steam-in-Place
        Upstream Support:   Polypropylene /      Cycles    Temp   Cycles   Temp  Gamma-Irradiation
                                                              (30 min.)
                         Polyester                                           PROPOR MR MURUS disposable
                                          Cartridges   10   130 °C (266 °F)   5   130 °C (266 °F)
        Downstream Support:   Polyester                                     filters can be gamma-irradiated up to a
                                          MURUS     10   130 °C (266 °F)   -   -
        Standard o-rings/gaskets: Silicone  DEMICAP   3   130 °C (266 °F)   -   -  maximum dosage of 40 kGy.
       MURUS Disposable Filter Capsules
        Upstream Support:   Polypropylene /   Sterilization
                         Polyester        PROPOR MR filter cartridges can be
        Downstream Support:   Polyester   sanitized with hot water at up to 90 °C
        Standard o-rings/gaskets: Silicone  (194 °F) and are compatible with a wide
        Capsule Body:   Polypropylene    range of chemicals.
        Capsules Vent Seals:   Silicone
                                          For detailed operational procedures and
       DEMICAP Disposable Filter Capsules  advice on cleaning and sterilisation, please
        Upstream Support:   Polyester    contact the Technical Support Group through
        Downstream Support:   Polyester  your usual Parker domnick hunter contact.
        Membrane Separation
         Layer:          Polyester        Food and Biological Safety
        Capsule Body:   Nylon            Materials conform to the relevant
        Capsules Vent Seals:   Silicone   requirements of 21CFR Part 177 and current
        Filling Bell:   Polycarbonate    USP Plastics Class  VI - 121 °C and
                                          ISO10993 equivalents.
       Recommended Operating Conditions
       Filter Cartridges
       Up to 70 °C (158 °F) continuous operating
       temperature and higher short-term
       temperatures during CIP to the following
       limits:
           Temperature    Max. Forward dP
          °C     °F      (bar)   (psi)
          20       68     5.0     72.5
          40     104      4.0     58.0
          60     140      3.0     43.5
          80     176      2.0     29.0
          90     194      1.7     24.6
       MURUS Disposable Filter Capsules
       Up to 25 °C (  77 °F) @ 5.5 barg (79.7 psig)
       Up to 60 °C (140 °F) @ 2.8 barg (40.6 psig)

       Parker Hannifin certify that this product complies with the
       European Council Pressure Equipment Directive (PED) 97/23/
       EC Article 3, Paragraph 3 - Sound Engineering Practice (SEP).
       This product is intended for use with Group 1 & 2 Dangerous
       and Harmless Liquids and Group 2 Harmless Gases at the
       operating conditions stated in this document : In compliance
       with PED Article 3, Paragraph 3, SEP, this product does not
       bear the CE mark.
       DEMICAP Disposable Filter Capsules
       Up to 40 °C 104 °F) at line pressures up to
       5.0 barg (72 psig).
   1   2   3   4