Page 2 - Parker - Glass-Mate Cartridges

™
Glass-Mate Cartridges

SPECIFICATIONS
Glass-Mate
Effective Filtration Area Biological Safety/Product Purity Flow Factor Flow Rate Capability
Glass-Mate
2
5 ft /10 in (0.46 m /254 mm) minimum • All components FDA listed per CFR, (psid/gpm @ 1cks) Length Factor
2
Title 21
Materials of Construction • Non-fi ber releasing per FDA Rating Flow Length Length
Filter Medium: (μm) Factor (in.) Factor
Borosilicate microfi berglass w/ acrylic binder Sterilization/Sanitization
Hot water (“F” construction): 180°F (82°C) 0.2 0.115 9 1.0
Support/Drainage Layers: for 30 minutes at maximum 15psid (1bar). 0.45 .108 10 1.0
Spunbonded polyester; laminated on the
downstream side In-Line Steam/Autoclave (“F” construction 1.0 .102 19 2.0
with stainless steel sleeve): 60 minutes at 2.0 .095 20 2.0
Recommended Operating Conditions 255°F (140°C) at 2psid (0.14bar) maximum 3.0 .090
Maximum Temperature pressure. 29 3.0
Glass Filled Polypropylene: 5.0 .072 30 3.0
200°F @ 35ΔP (93°C/2.4bar) Flow Rate and Pressure 10 .060 39 4.0
Polyester: Drop Formulas
20 .042 40 4.0
140°F @ 35ΔP (60°C/2.4bar) Flow Rate (gpm):
Stainless Steel: Clean ΔP x Length Factor 40 .018
275°F @ 35ΔP (135°C/2.4bar) Viscosity x Flow Factor
Liquid Particle Retention Ratings (μm)
Change-out Differential Pressure Clean ΔP: @ Removal Effi ciency of:
35psi (2.4bar) Flow Rate x Viscosity x Flow Factor ß=5000 ß=1000 ß=100 ß=20 ß=10
Length Factor Cart.
Maximum Flow Rate Absolute 99.8% 99% 95% 90%
10gpm per 10 in length (38 lpm/254 mm) PMG002 0.2 0.15 <0.1 <0.1 <0.1
Design Flow Rate Notes: PMG004 0.45 0.3 <0.1 <0.1 <0.1
5gpm per 10 in length (9.5 lpm/254 mm)
1. Clean ΔP is psi differential PMG010 1.0 0.6 0.2 <0.1 <0.1
Maximum Differential Pressure at start. PMG020 2.0 1.2 0.4 0.2 0.1
2. Viscosity is centistokes. Use
Glass-Filled Polypropylene: Conversion Tables for other PMG030 3.0 1.8 0.6 0.3 0.2
90psi @ 75°F (6.2bar/24°C)
units.
PMG050 5.0 3 1.3 0.5 0.4
Polyester: 3. Flow Factor is ΔP/GPM at 1cks PMG100 10 7 3.5 1.6 1.2
70psi @ 75°F (4.8bar/24°C) for 10 in (or single).
4. Length Factors convert fl ow or PMG200 20 16 8 4 2.5
Stainless Steel: ΔP from 10 in (single length) to
75psi @ 275°F (5.1bar/135°C) required cartridge length. PMG400 40 32 20 11 8
Ordering Information

PMG — —

Particle Nominal Length Support Construction Seal Material End Cap Confi guration Special Options
Removal Rating
CODE INCHES mm CODE MATERIAL CODE MATERIAL CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION
CODE MICRON
5
9 9 ⁄ 8 ˝ 244 Glass-fi lled Polyethylene Foam 020 O-ring/ Individual Poly
002 0.2 P AR TC 222 O-ring/Flat Cap Z6
polypropylene (DOE gasket only) Recessed cap bag only
10 9 13 ⁄16 ˝ 249
004 0.45 F core & pure E EPR DO Double open end (DOE) TF 222 O-ring/Fin
19 19 5 ⁄ 8 ˝ 498 polypropylene Individual poly bag
010 1.0 extruded outer N Buna-N Z15 15/ctn.
20 19 15 ⁄16 ˝ 506 cage DX Double open end/ TX 222 O-ring/Flex Fin (20˝, 30˝, 40˝)
020 2.0 S Silicone extended core
29 29 ¼ ˝ 743 Polyester core, Individual poly bag
030 3.0 P end caps & PFA Encapsulated 120 O-ring/ Ext. core open end/ Z30 30/ctn. (10˝)
30 30 1 ⁄16 ˝ 764 outer netting LL XB Polypropylene
050 5.0 T Viton ® (222, 226 Recessed Cap 3 spring closed end
39 39 ˝ 991 304 Stainless O-ring only) 2
100 10 Steel core with SS inserted 226
40 40 ˝ 1016 G V Viton ® LR 120 O-ring/Recessed 3 SSC
200 20 polyester outer O-ring/Closed
netting 1
X No seal material
400 40 Std. open end/
Coreless SS inserted 226
X 2 PFA/Viton is O-ring only; for DOE OB Polypropylene SSF
Cartridge spring closed end O-ring/Fin
1 Stainless steel end caps incl.
only on DO code option PR 213 O-ring/ STC SS inserted 222
Recessed cap 3 O-ring/Closed
SS inserted 222
SC 226 O-ring/Flat Cap STF
O-ring/Fin
SF 226 O-ring/Fin
3 Available only in 9 5 ⁄ 8 ˝ (-9) and 19 5 ⁄ 8 ˝ (-19) lengths
Specifi cations are subject to change without notifi cation. © 2010 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - North America
All Rights Reserved
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
DS_IP_Glass-Mate Rev. A
32