Page 39 - Des-Case - Des-Case Product Catalog

FLUID HANDLING FLUID HANDLING

Filter Elements Filter Elements

Spin-On Filters Depth Filter Elements

Spin-on filters offer a broad range of thermal and chemical Wound cellulose depth filter elements are an inexpensive method for obtaining
compatibility. These elements are very versatile and work on a high-efficiency filtration in light-viscosity oils such as hydraulic, turbine, or
wide array of applications. Synthetic media offers the widest transformer oils. This element helps to clean the oil by dislodging contaminant
chemical compatibility and steel wire construction maintains and achieves particle removal below 1 micron. Depth filter media should not be
proper shape while lowering restriction. used for water removal purposes.
REPLACEMENTS FOR DES-CASE FILTRATION PRODUCTS: REPLACEMENTS FOR DES-CASE FILTRATION PRODUCTS:
Small Spin-On Filters • TC Series Filter Cart • Mobile Equipment Kits
• Drum Toppers • Lubricant Management Systems and T-Stand

Large Spin-On Filters STANDARD FEATURES:
• Filter Carts • Panel Units • Axial flow between the layers of the media
• Drum Filter Carts • LT-Series Lubricant Management Systems • Performance ß< 3(c)=1000 (per ISO 16889)

• High dirt holding capacity
STANDARD FEATURES: • Can maintain moisture to levels below 50 ppm
• Maximum working pressure of 200 psi
• Typical burst pressure of 290 psi
• Element collapse at 100 psi Bag Filters
• Buna-N nitrile seals in two sizes (Viton and EPDM also available)
• 1.5" – 16 UN mounting thread Bag filters are excellent pre-filtration solutions to catch large,
• Spin-on design harmful particulates that would otherwise damage or quickly
plug primary filters. Filters have a high solids retention capacity
Full Flow Filter Elements and are compatible with most fluids.

Full flow filter elements provide high efficiency filtration with low pressure drop. REPLACEMENTS FOR DES-CASE FILTRATION PRODUCTS:
With a high holding capacity, they are ideal for large applications and highly • TC Series Filter Cart and T-Stand
contaminated lubricants. Synthetic media with smooth, rounded fibers allow low
resistance to fluid flow and have excellent chemical compatibility. STANDARD FEATURES:
REPLACEMENTS FOR DES-CASE FILTRATION PRODUCTS: • Polypropylene (PPE) or Nomex® felt
• TC Series Filter Cart and T-Stand • Singed or glazed surface to prevent fabric fibers from entering media
• VAC Series Vacuum Dehydrators • Compatible with most fluids except those that are strongly alkaline or acidic
• Efficiency of 85% at stated micron rating
STANDARD FEATURES:
• Four filler media types: Microfiber • Maximum viscosity: ISO VG 1000
glass, water removal molecular sieve, • Endcap & center tube: corrosion
acid removal activated alumina, and protected steel
acid removal with Selexorb® • Gasket material: nitrile
• Performance to ß<3(c)=1000 • Collapse pressure rating: 125 psid
(per ISO 16889) • Temperature range: -45°F to 225°F
• Microfiber glass epoxy coated • Replacement pressure: 25 psid
wire support
• Maximum differential pressure: 150 psi Visit descase.com for full filter specifications.
• Maximum flow rate: 150 gpm

38 615.672.8800 • descase.com 615.672.8800 • descase.com 39