Page 2 - Parker - Fulflo Abso-Mate Cartridges

®
™
Fulfl o Abso-Mate Cartridges

SPECIFICATIONS Biological Safety/Product Purity Performance Attributes
Materials of Construction • Meets USP XXI VI requirements for Flow Rate and Pressure Drop Formulas
plastics Flow Rate (gpm) = Clean ΔP x Length Factor
Type of Construction • All components FDA listed per CFR, Viscosity x Flow Factor
• Integrally sealed, all-polypropylene pleated Title 21
media supported by all-polypropylene • Non-fi ber releasing per FDA Part Clean ΔP = Flow Rate x Viscosity x Flow Factor
construction 210.3B (5) and (6) Length Factor
• Non-photo sensitive
Filter Media Notes:
• Melt blown polypropylene microfi ber Filtration Ratings 1. Clean ΔP is psi differential at start.
2. Viscosity is centistokes. Use Conversion Tables for other units.
99.98% effi ciency at 0.2, 0.45, 1, 2, 5, 10,
Media Support Layers 3. Flow Factor is psid/gpm at 1cks for 10 in. (or single).
• Non-woven or mesh polypropylene 20, 40, & 70 μm pore sizes 4. Length Factors convert fl ow or ΔP from 10 in. (single length) to
required cartridge length.
Media Support Core Beta Ratio (ß) =
• Heavy wall high strength polypropylene Upstream Particle Count @ Specifi ed
Particle Size and Larger
Media Support Cage and Thermally Welded Downstream Particle Count @ Specifi ed
End Caps Particle Size and Larger
• Molded polypropylene
Percent Removal Effi ciency = ß-1 100
Seal Materials ß
®
• Buna-N, EPR, Silicone, Viton , PFA Performance determined per ASTM F-795-88. Single-Pass Test
using AC test dust in water at a fl ow rate of 3.5gpm per 10 in.
Encapsulated Viton ® (13.2 lpm per 254 mm) cartridge.
Abso-Mate
Dimensions Liquid Particle Retention Ratings (μm) Abso-Mate
Flow Factors
Cartridge Outside Diameter @ Removal Effi ciency of: (psid/gpm @ 1 cks) Length Factors
11
• 2 ⁄ 16 in. ß=5000 ß=1000 ß=100 ß=50 ß=20 Rating Flow In. Factor
Cart.
Cartridge Inside Diameter Absolute 99.9% 99% 98% 95% (μm) Factor 9 1.0
• DOE: 1 ⁄ 16 in. PAB002 0.2 <0.2 <0.2 <0.2 <0.1 0.20 3.100
1
5
• SOE: 1 ⁄ 32 in. 10 1.0
PAB004 0.45 0.4 0.2 <0.2 <0.1 0.45 1.000
19 2.0
Maximum Recommended PAB010 1 0.8 0.4 <0.2 <0.1 1 0.750
20 2.0
Operating Conditions PAB020 2 1.9 0.8 <0.2 <0.1 2 0.300
29 3.0
Temperature: 200°F (93°C) PAB050 5 3.8 1.4 0.4 0.15 5 0.072
30 3.0
Change Out ΔP: 35psi (2.4bar) PAB100 10 7 2 0.5 0.25 10 0.031
39 4.0
ΔP @ Ambient 70°F (21°C): 90psi (6bar) PAB200 20 13 4 1.8 0.35 20 0.021 40 4.0
ΔP @ 200°F (93°C): 20psi (1.4bar) PAB400 40 22 7 3.2 0.8 40 0.012
PAB700 70 52 22 15 5.5 70 0.008
Flow Rate: 10gpm (38 lpm) per 10 in. length
Ordering Information
PAB —

Filter Rating Nominal Length Support Construction Seal Material End Cap Confi guration Special Options
CODE MICRON CODE IN. mm CODE MATERIAL CODE MATERIAL CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION
002 0.2 9 9 ⁄ 8 5 244 Glass-fi lled Polyethylene Foam AR 020 O-ring/Recessed cap SSC SS inserted 226 O-ring/Closed B Bubble-point test
F P
Polypropylene (core only) (DOE gasket only)
004 0.45 10 9 13 ⁄16 249 DO Double open end (DOE) SSF SS inserted 226 O-ring/Fin DI water rinse
R
304 Stainless Steel (5 min.)
010 1 19 19 5 ⁄ 8 498 G (core only) E EPR DX Double open end/extended core TC 222 O-ring/Flat
N Buna-N Individual Poly
020 2 20 19 15 ⁄16 506 Natural Polypropylene LL 2 120/120 (Filterlite LMO & TF 222 O-ring/Fin Z6
A Nuclepore Polymeric Vessels) bag only
050 5 29 29 ¼ 743 (All support components) S Silicone
X Coreless Cartridge 120 O-ring/Recessed
100 10 30 30 1 ⁄16 764 PFA-Encapsulated LR 2 (Nuclepore) STC SS inserted 222 O-ring/Closed
T 1 Viton ® (222, 226 &
200 20 39 39 991 O-ring only)* Std. open end/Polypropylene
OB STF SS inserted 222 O-ring/Fin
400 40 40 40 1016 V Viton ® spring closed end
213 O-ring/Recessed cap (Ametek ®
700 70 X No seal material PR 2 TX 222 O-ring/Flex Fin
& Parker LT Polymeric Vessels)
1 PFA/Viton is O-ring only, T is
SC 226 O-ring/Flat
expanded PTFE gaskets Ext. core open end/
XB
SF 226 O-ring/Fin Polypropylene spring closed end
2 Available only in 9 5 ⁄ 8 ˝ (-9) and 19 5 ⁄ 8 ˝ (-10) lengths
Specifi cations are subject to change without notifi cation. © 2010 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - North America
All Rights Reserved
Fulfl o is a registered trademark of Parker-Hannifi n Corporation
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
Ametek is a registered trademark of Ametek, Inc.
DS_IP_Abso-Mate Rev. A
24