Page 4 - Ingersoll Rand - Ergonomic Handling Systems

4

Three Building Blocks to a Complete Ergonomic Handling Solution

Overhead SuppOrt Overhead SuppOrt

E

d

I TRANSFER • Capacities up to 2,000 lb • Capacities up to 3,000 lb

Gu • Floor supported to eliminate the need for • For use when there is limited floor space and • Provides simple single-axis transfer

overhead support structure
adequate ceiling structure to support the load
• For use when there is adequate floor space and
• Capable of mounting parallel or perpendicular to
• Curved sections available for navigating
/or the ceiling structure cannot support the load
overhead support steel
obstructions
• Provides rectangular coverage for a single
• Provides rectangular coverage for a single
workstation, or an entire assembly line with
workstation, or an entire assembly line with
multiple bridge cranes
multiple bridge cranes
N • Capacities up to 2,000 lb • Capacities up to 1,000 lb • Capacities up to 363 lb
• Allows user to move load
• Used in applications where:
via up / down controls • InteLIFT removes the need • Lifts ranging from 5 to 9 ft
for up / down switches and
allows for completely manual
then float mode allows for

- Loads travel a relatively
o precision manual movement operation by sensing user - One tool is used
short distance
force input and translating it
and placement of the load
repeatedly in a
without having the “jogging”
to precise lifting / lowering
associated with air and • Features float mode - Single load balancing
limited area
throughout entire range of
electric hoists
of motion, such as
ECTI • Used in applications handling device is required (weld guns, handling device
assembly stations
motion
• Energy savings — less air
consumption than an air
• Used in applications where:
- Precision spotting is
hoist

assembly fixtures, etc.)
necessary
- Hands-on control of load

where precision spotting is
necessary
is required / beneficial
- One hand operation is

• Offers up to 120" travel
beneficial
l • Used in applications • Used in applications • Used in applications
- Simple pick and
- Simple pick and
where: where: where:
- Part is cylindrical
E - Straight transfer with an accessible - Straight transfer
place
place
hole in the core
with no part
manipulation - Straight transfer with no part
or manipulation
manipulation
S - Hook access is - Typical parts - Accessible grab
of parts
readily available
locations on both
include rolls and
- Odd-shaped parts

machined parts sides of part