Page 42 - Ingersoll Rand - Ergonomic Handling Systems

42

Quantum Series Electric Hoists

1/8 to 1 metric ton lifting capacities

Quantum Series pendant control:

Handy Handle control Standard ergonomic
This ergonomically designed control “Charlie” pendant
enables precise operation at the hook and Pendant features
acts as a robotic power extension of the horizontal two-speed
operator’s arm. The load can be positioned switch button for up and
and controlled with one hand, freeing the down hoist operations.
other to position the load. The Handy
Handle can be ordered separately as part
of a kit, to convert any 1/8-, 1/4-, and
1/2-ton single-line Quantum hoist, or as
an “H” control option on a new hoist.
Each Handy Handle comes standard with
single- or dual-speed thumb control lever
switches and red emergency stop button.
A socket connection at the bottom allows
the standard hook to be easily replaced
by custom-end effectors or grabs.

Quantum models

Amperage
Capacity lift
Metric Chain Speed Motor Weight*
Model Tons Falls fpm HP 230v 460v 575v lb
THREE-PHASE (SINGlE-SPEEd)
QCH50-1NS12 1/8 1 32 1 3.5 1.8 1.4 45
QCH50-1NS25 1/4 1 32 1 3.5 1.8 1.4 45
QCH50-1NS50 1/2 1 32 1 3.5 1.8 1.4 45
QCH50-2NS100 1 2 16 1 3.5 1.8 1.4 50
QCH100-1NS100 1 1 32 2.1 7.4 3.7 3.0 100
THREE-PHASE (duAl-SPEEd)
QCH50-1ND12 1/8 1 32 / 8 1 3.5 1.8 1.4 50
QCH50-1ND25 1/4 1 32 / 8 1 3.5 1.8 1.4 50
QCH50-1HD25 1/4 1 50 / 12 1 3.5 1.8 1.4 50
QCH50-1ND50 1/2 1 32 / 8 1 3.5 1.8 1.4 50
QCH50-2ND100 1 2 16 / 4 1 3.5 1.8 1.4 55
QCH100-1ND100 1 1 32 / 8 2.1 8.0 4.0 3.2 101
Multiply speeds shown by 0.83 for 380-volt / 50 Hz units. Industrial lifting Catalog: Form No. MHd55003
*All weights listed are with standard 10 ft of lift and 6 ft of pendant drop
available online at ingersollrandproducts.com/lifting
Example: QCH100-1NS100H-21-17-4C Quantum Hoists model driver
Base Model Suspension Lift (ft) Pendant Drop (ft) Voltage Options
QCH100- H - 21 - 17 - 4 C
1NS100
E = Eye bolt 10 = Standard 6 = Standard 3 = 230/3/360 C = Chain container
See model H = Hook 15 = Standard 11 = Standard 4 = 460/4/60 E = External strain relief
tables above for 20 = Standard 16 = Standard 5 = 575/3/60 F = XX, specify power cord length
available models xx = Specify xx = Specify length 6 = 380/3/50* (standard is 15 ft)
length H = Handy Handle
* These units have K = 110 volt control
extended lead P = Pendant with vertical aligned buttons
times and are P2 = Pendant with 2 extra vertical aligned buttons
not UL or C-UL P4 = Pendant with 4 extra vertical aligned buttons
Note: Additional options and capacities available. (Canadian UL) Y = Bullard top hook
Refer to Industrial Lifting Catalog: Form No. MHD55003 listed. Z = Bullard bottom hook
available online at ingersollrandproducts.com/lifting