Page 2 - Parker - EVADUR Filter Cartridges
P. 2

™
        Evadur  Filter Cartridges

        High Flow, High Purity Membrane Cartridge (General Grade)



        Materials of Construction:           Maximum Differential Pressure:            Evadur fl ow rate vs. ΔP for
        Membrane:                            Forward:                                   1 cps liquid @ 73°F (23°C)
        Hydrophilic polyethersulfone          70 psi (4.8 bar) @ 77°F (25°C)
                                                                                       LPM
                                              30 psi (2.1 bar) @ 176°F (80°C)          0    20   40    60
        Membrane Support/Drainage:
                                             Reverse:                                5
        Polypropylene
                                              50 psi (3.4 bar) @ 77°F (25°C)                  0.1µm
        Structural components:                                                       4                          .3
        Polypropylene                        Sterilization/Sanitization Methods:                   0.2µm
                                             •  Isopropyl Alcohol                         0.03µm        0.45µm
        Seal Material:                       •  Sodium Hydroxide                     3                          .2
        Various                              •  Hydrogen Peroxide                  Differential Pressure  0.65µm
                                             •   Hot Water: 190°F (88°C) @ 5 psid    2
        Sealing Method:
                                                (0.3 bar)
        Thermal welding                                                                                         .1
                                             •   Autoclave: 250°F (121°C) for 30
                                                minutes at 15 psi (1.0 bar)          1
        Dimensions:
                                             •   In Situ Steam:  284°F (140°C) for
        Diameter: 2.7 in (6.8 cm)                                                  PSI                            BAR
                                                60 minutes at 15 psi (1.0 bar)       0                          0
        Lengths: 10-40 in (25-102 cm)                                                 0     5    10   15    20
                                             •  Chlorine
                                                                                      GPM      Flow Rate
                                             •  Sodium Hypochlorite
        Recommended Operating
                                             •  Sanitizing Agents
        Conditions:
                                                (refer to most recent Compatibility   Consult your Process Advanced Fitlration Division
        Maximum Temperature: 176°F                                                representative for gas fl ow data.
                                                Guide for details)
        (80°C) @ 30 ΔP (2.1 bar)
                                             Installation Rinse-In:
                                             Cartridges typically rinse to back
                                             ground resistivity in less than six
                                             minutes at 3.5 gpm/10" equivalent
        Ordering Information
        Each cartridge is identifi ed with a product number, pore size, and lot number for traceability.
             EV                           B


         Cartridge Code  Pore Size (μm)  Diameter (in)  Length (in)   Seal Material       End Cap Confi guration
          EV   Evadur    T    0.03     B     2.7     10    10      E        EPR         HH   Double Open End
                         S     0.1                   20    20      B       Buna-N       DX   DOE w/extender
                         F     0.2                   30    30      S       Silicone     SC   226 O-ring/Flat Cap
                         R    0.45                   40    40          PFA Encapsulated   SF  226 O-ring/Fin
                                                                   T       Viton ®
                         H    0.65                                                      TC   222 O-ring/Flat Cap
                                                                         (O-ring only)
                                                                                        TF   222 O-ring/Fin
                                                                           Viton
                                                                               ®
                                                                   V
                                                                         (O-ring only)  LL   120 O-ring (both ends)
                                                                   X    No seal material  LR  120 O-ring/Recessed End
                                                                                        PR   213 O-ring/Recessed
                                                                                        AR   020 O-ring/Recessed
        Specifi cations are subject to change without notifi cation.                              © 2010 Parker Hannifi n Corporation
        Evadur is a registered trademark of Parker-Hannifi n Corporation.                domnick hunter Process Filtration - North America
        Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.                             All Rights Reserved
                                                                                                     DS_IP_Evadur   01/12 Rev. A
   1   2