Page 132 - Parker - Parker Pneumatic

PDE2600PNUK
Parker Pneumatic Origa OSP-P Rodless Cylinders

Order Instructions - Basic Cylinder

1-4 5+6 7 8 9 10 11 12-16 17 18 19 20 21 22 23 24 25
OSPP 25 0 0 0 0 0 01100 0 0 0 0 0 0 0 0 0

Piston-Ø Stroke Piston add. Guide Measuring
Length Mounting Carriage system
10
In mm 0 without 0 without 0 without
16 (5 digits) clevis X SFI 0.1 mm
25 1 mounting
32 Y SFI 1 mm
40
Screws Cushioning
50
0 standard 0 standard
63 3)
1 Stainless 1 max. length
80

Version / Piston Lubrication End cap position Guides/ Brakes/ Cover /
Inversion Cable Channel
0 standard 0 standard 0 l+r 0° = in front
0 without 0 standard
1 Tandem 1 slow speed 2) 3) 1 l+r 90° = underneath
Activebrake AB 1 Cable channel
2 l+r 180° = at the back A
Ø 25-80 Cable channel
3 l+r 270° = same side as 2 two-sided
outerband M Inversion
Air Connection Seals 4 l 90° = underneath; Ø 16-80 X without cover rail
r 0° = in front Duplex
0 standard 0 standard (NBR) N
5 l 180° = at the back; Ø 25,32,40,50
1 end face 1 Viton
® 1)
r 0° = in front
2 both at one end
6 l 270° = same side as
3 left stand. outerband;
right end face r 0° = in front
End cap position
4 right stand. 7 l 0° = in front; (air connection) 270°
left end face r 90° = underneath same
side as
A 3/2 Way valve 8 l 180° = at the back; 270° 180° outerband
VOE 24 V = r 90° = underneath same at the back
Ø 25,32,40,50 9 l 270° = same side as side as end-face
B 3/2 Way valve outerband; 180° outerband
VOE 230 V~ / 110 V= r 90° = underneath at the back
Ø 25,32,40,50 0°
A l 0° = in front; in front
C 3/2 Way valve r 180° = at the back 90°
VOE 48 V = B l 90° = underneath; end-face 0° underneath
Ø 25,32,40,50 in front
r 180° = at the back 90°
E 3/2 Way valve C l 270° = same side as underneath Cylinder
VOE 110 V~ outerband; R
Ø 25,32,40,50 r 180° = at the back Cylinder (right end side)
D l 0° = in front; L
r 270° = same side as (left end side)
outerband
E l 90° = underneath;
r 270° = same side as
outerband 1) Viton with VOE not available.
2) Slow speed lubrication in combination with
F l 180° = at the back; r
270° = same side as Viton® seals on demand
outerband 3) „Lubrication slow speed“ in combination
with „max. cushioning length“ not possible.

Parker Hannifin Corporation
Origa Division - Europe
132