Page 468 - Parker - Parker Pneumatic

PDE2600PNUK
Parker Pneumatic Moduflex Valve System - P2M - T Series
®

Individual connection valve islands : T series
New for

In a T series valve island, electrical controls are individually 2015
connected to each valve module, onto its solenoid pilot.
As an alternative, air pilot valve modules are also available,
to be controlled by individual pneumatic signals.

Valve island assembly Valve island configuration
As shown by the above illustration, the valve The following page presents all valve pneumatic head and tail module set and
modules are one by one screwed onto each sizes and functions that may enter into sometimes an intermediate module set
other, starting from the head module. For this a T series valve island and, for each including 4 configuration plates for different
task, the single integrated screw is tightened valve size, a choice of clip-on pneumatic functions.
with a torx T8 standard screwdriver. connectors : tubing size, straight, elbow... Valve modules may either be solenoid
The pneumatic connectors may be clipped or To receive its pressure supply and collect versions or air pilot versions. Mixing both
unclipped at any stage. its exhaust, the island also requires a versions into the same valve island is
With a LED, a manual override and a labelling possible.
for each valve pilot (see above illustration), the
island front face eases the "man / machine"
dialog. Head Tail
The resulting valve island length is expressed module plate
by the drawing below, while further size details Valve island
and mountings are presented on dimensions assembly
pages.
Valve pilot connections
1 - Solenoid valve modules

LED
Labelling Torx T8 screw driver
Electrical Island mounting
connectors Manual (order code : P2M1K0TASD)
and marking for override
easy
man / machine
dialog

In its IP40 version, each solenoid shows Clip 3 mm dia.
connection integrating LED and voltage surge maxi.
protection. The clip connector with flying leads Island assembly with
may be ordered separately with independent or a single screw per module
interconnected common.
In its IP67 version, each solenoid shows a M8
connection. Lockable connectors, IP67 protected,
with LED voltage surge protection and flying lead Modules and island ordering
cable may be ordered for the required length.
Choice between 3 approaches : 2 - Complete modules ordering :
2 - Air pilot valve modules 1 - Basic modules ordering : Page 265 shows the ordering chart for
The following page shows these modules modules supplied with their connectors.
4 mm supplied without connector, together with 3 - Assembled island ordering :
OD tube the choice of clip-on connectors separately Page 268 shows the valve island
supplied (10 units packs). This approach configurator CD-Rom to specify a valve
gives the maximum flexibility. island that may be delivered assembled.

No connector has to be ordered :
each pneumatic pilot port includes its Pneumatic head Valve module Valve module Intermediate Tail
integrated swivable elbow 4 mm OD tube . module : size 1 : . size 2 : . module : plate :
width : 25 mm .
.
width : 16 mm
width : 25 mm
width : 32 mm
width : 37.5 mm
push-in connector.
Typical T series
Typical T series short hight flow
island for single or island for
double acting small both small
cylinders. and large
cylinders.
Typical T series islands combining different valve flows and functions
Parker Hannifin Corporation
Pneumatic Division - Europe
468