Page 616 - Parker - Parker Pneumatic

PDE2600PNUK
Parker Pneumatic Parker Global Air Preparation System

Together we can power your

application with clean, dry air

Fast cycle times, high product quality, and low downtime all require a clean, dry
pneumatic system to function properly. Parker has what it takes to make sure
pneumatic systems perform at their best.

Clean, dry pneumatic systems with

Parker Global Air Preparation

Stage 1 2

As air is compressed
to 7 bar (100 psig) For every 11C (20F) 3
that the air cools
and higher, the relative after leaving the heat
humidity quickly
reaches 100% RH and of the compressor,
50% of the moisture
air temperatures can condenses into liquid Bulk liquid separators
reach between remove condensed 4
110°C and 200°C into the system. liquids after the
(230°F and 392°F). aftercooler, receiver,
The excess moisture or anywhere within the Particulate filters are
condenses and distribution system. 5
collects in the receiver used for the removal
tank and distribution Bulk liquid separators of solid particle
lines. This condensate also help protect contaminants down to
5 micron, as well as
must be removed. downstream filters the removal of Coalescing filters are
in the system where designed to remove
excess cooling takes condensed liquids water and oil aerosols
place. (not vapor) and
Note: Water and oil,
in vapor form, pass particulate from air
through general streams down to 0.01
purpose particulate micron in size.
filters.
Installed in pairs,
Particulate and
This type of filter
should be used as Coalescing filters
Key a prefilter for the ensure a continuous
coalescing (oil supply of high quality
Particulate removal) filter. air.
Oil
Water
Oil Vapor
Water Vapor

Parker Hannifin Corporation
Pneumatic Division - Europe
616