Page 14 - Apollo - Commercial Products Catalog

APOLLO BALL VALVE
NUMBERING SYSTEM

APOLLO NUMBERING SYSTEM FORMULA: 70 - 105 - 01
XX - X X X - XX
SERIES CONFIGURATION VARIATIONS SIZE* OPTIONS
32 Bronze Ball Valve, Regular-Port, NPT 1 = FNPT 4 = 316 Stainless Steel 1 = 1/4” -01 = Standard
50 Bronze Gas Valve, CSA & UL Listed 2 = Solder Ball & Stem 2 = 3/8” -02 = Grounded
51 Bronze Gas Valve, CSA 3 = Union End NPT 9 = Pinned Retainer 3 = 1/2” -04 = 2-1/4” Stem extension
6PLF Lead Free Cast Iron, Ball Valve, Full-Port, 6 = 3-Way NPT 4 = 3/4” -07 = Tee Handle
Flanged, International 7 = Full-Port Refrigeration Valves 5 = 1” -08 = 90˚ Reversed Stem
8 = Male X FNPT 6 = 1-1/4” -10 = Stainless Steel Lever & Nut
9 = 3-Way Solder 7 = 1-1/2” -11 = Therma-Seal™ Insulating Handle
70 Bronze Ball Valve 8 = 2” -12 = Stamped “157 SWP” & Bagged
70HC Bronze Ball Valve with Hose Cap 9 = 2-1/2” -13 = Stamped “157 SWP”
70LF Lead Free** Bronze Ball Valve 0 = 3” -14 = Side Vented Ball (uni-directional)
70LFHC Lead Free** Bronze Ball Valve with Hose Cap A = 4” -15 = Round Handle, Steel
71 Bronze Ball Valve with Pads -16 = Chain Lever - Vertical
75 Bronze Ball Valve, Std. Port, Padlocking -17 = Rough Chrome Plated
77 Bronze Full-Port Ball Valve -18 = Plain Yellow Grip
77C Bronze Ball Valve, Full Port, Contractor Grade -19 = Lock Plate
77CLF Lead Free** Bronze Ball Valve, Full Port -20 = Slot Vented Ball (bi-directional)
77D Bronze Ball Valve, Full Port, Direct Mount *BODY SIZE WHEN ENDS ARE MIXED. -21 = UHMWPE Trim (non-PTFE)
for Actuators -24 = Graphite Packing
77F Brass Ball Valve, Full Port, USA NOTE: NOT ALL VARIATIONS AND FEATURES ARE AVAILABLE -27 = Stainless Steel Latch-Lock Lever & Nut
77FLF Lead Free** Brass Ball Valve, Full Port ON SAME VALVE. CONSULT CONBRACO REPRESENTATIVE. -30 = Cam-Lock and Grounded
77V APOLLOXPRESS® Brass Ball Valve -32 = Stainless Steel Tee Handle & Nut
77VLF Lead Free** APOLLOXPRESS® Brass Ball Valve -35 = VTFE Trim (PTFE)
77W Bronze BV, Full Port, APOLLOXPRESS® ** LEAD FREE: The wetted surfaces of this product shall -36 = Stainless Steel Hi-Rise Round
77WLF Lead Free ** Bronze BV, Full Port, APOLLOXPRESS® contain no more than 0.25% lead by weighted average. Handle, Stainless Steel Nut
78 Specialty Valves Complies with Federal Public Law 111-380. ANSI 3rd party -39 = SS Hi-rise Locking Round Handle,
79 Refrigerant Ball Valves approved and listed. SS Nut
77B Bronze Ball Valve, Side Tap -40 = Cyl-Loc and Grounded
7K Bronze Ball Valve, with Drain -41 = Automatic Drain
80 Bronze Ball Valve, UL Listed -45 = Less Lever and Nut
82 Bronze Three-Piece Full-Port Ball Valve -46 = Latch-Lock Lever - Lock in Closed
82LF Lead Free** Bronze Three-Piece Full-Port Position Only
9A Bronze, Unibody, Heavy Pattern -47 = SS Oval Latch-Lock Handle & Nut
90 Bronze, Unibody, UL Listed Ball Valve -48 = SS Oval Handle (No Latch) & Nut
94A Brass, Full-Port, UL Listed, International -49 = Assembled Dry
94ALF-A Lead Free** Brass, Full Port, International -50 = 2-1/4” Carbon Steel Locking Stem Extension
94MBV Brass Mini-Ball Valve, Std. Port, International -56 = Multifill Seats & Packing
94XLF Lead Free** Brass Ball Valve, PEX, Int’l -57 = Oxygen Cleaned
94VLF Lead Free** Brass Press Ball Valve, Int’l -58 = Chain Lever - Horizontal
95ALF Lead Free** Brass Stop & Waste Valve, Int’l -59 = SS External Trim - 3-pc. Valves & Flange
-60 = Grounded Ball & Stem
-62 = Body Center Section (82 Series)
-63 = NPT x Solder (-100-63-NPT Body;
-200-63-Sweat Body)
-64 = 250 SWP
-65 = Multifill Seats & Graphite Packing
-72 = RTFE Packing
-91 = Locking SS Tee (3/4” and 1”)
-92 = Balancing Stop
-94 = -04 & Balancing stop
-BC = Ball Check
-HC = Hose Thread and Cap Option
-SV = Safety vent - 77-100/7K-100 series
(Auto drain)
-SW = Limit switch mounted
-TH = Tested, Hydrostatic
-TC = Tested, Hydrostatic, w/certification
-TW = Tested, Hydrostatic, w/witness
and certification

14
Customer Service (704) 841-6000 www.apollovalves.com