Page 55 - Parker - Process filtration

™
Avasan Filter Cartridges

SPECIFICATIONS
Materials of Construction Maximum Recommended Dimensions (Nominal)
1
7
Operating Conditions 1- ⁄ 16 in. (27mm) ID x 2- ⁄ 16 in.
Filter Medium
100% melt blown polypropylene Temperature (62mm) OD (max.)
@ 50psid (3.45bar): 80°F ( 27°C) 4, 10, 20, 30, and 40 in. continuous
End Caps/Adapters (optional)
@ 25psid (1.72bar): 140°F (60°C) nominal lengths
Various; refer to Ordering Information
Flow Rate
Seal Options Nominal Filtration Ratings (90%)
5gpm (18.9 lpm) per 10" length
Various; refer to Ordering Information 1μm, 3μm, 5μm, 10μm, 20μm, 30μm,
Recommended Maximum 50μm and 75μm
- All materials of construction are FDA listed Change Out ΔP: 35psi (2.4bar)
as acceptable for potable and edible
liquid contact according to CFR Title 21.
- Pending Certifi cations:
NSF - Materials only

Flow rate is per 10" cartridge. For liquids other than water, multiply the
pressure drop by the fl uid viscosity in centipose.

Ordering Information
AVS M — —

Cartridge Code Micron Rating Nominal Length End Cap Confi guration Seal Material
AVS AVS Cartridge (μm) CODE IN. (mm) CODE DESCRIPTION CODE MATERIAL
1 4 4" (102) Double Open End (DOE) w/o None Omit
None gaskets
3 9.75 9.75" (248) Poly foam gaskets w/
A
DO DOE collars (DO only)
5 10 10" (254)
LL 120 O-ring both ends** E EPR
10 19.5 19.5" (495)
LR 120 O-ring/Recessed** N Buna-N
20 20 20" (508)
Std. open end/Polypropylene S Silicone (o-ring only)
30 29.25 29.25" (743) OB
spring closed end
50 30 30" (762) PFA Encapsulated
PR 213 O-ring/Recessed** T Viton ® (222, 226 O-
75 39 39" (991) ring only)
SC 226 O-ring/Flat
40 40" (1016) V Viton ®
SF 226 O-ring/Fin
Poly foam gaskets
W
TC 222 O-ring/Flat w/o collars (DO only)
TF 222 O-ring/Fin
TX 222 O-ring/Flex fi n
XA DOE w/extended core
Ext. core open end polypropylene
XB
spring closed end
** Available only in 9-¾" and 19-½" lengths.
Specifi cations are subject to change without notifi cation. © 2010 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - North America
All Rights Reserved
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
DS_IP_Avasan Rev. A
55