Page 63 - Parker - Process filtration
P. 63
®
Fulfl o MegaBond Nominal Filter Cartridges
™
MBN Flow Factors
SPECIFICATIONS
Materials of Construction Aqueous
Filter Medium Rating Service MBN Length
Factors
100% melt blown polypropylene (μm) psi/gpm per 10
End Caps/Adapters (optional) in cartridge Length Length
Polyolefi n copolymer MBN05 0.15 (in) Factor
Seal Options MBN1 0.13 9.75 1.0
Various; refer to Ordering Information
MBN5 0.11 10.00 1.0
Maximum Recommended MBN10 0.10 19.50 2.0
Operating Conditions 20.00 2.0
Temperature MBN25 0.09
@ 40psid (2.7bar): 80°F ( 27°C) MBN50 0.05 29.25 3.0
@ 20psid (1.4bar): 140°F (60°C) MBN75 0.03 30.00 3.0
Flow Rate 39.00 4.0
5gpm (18.9 lpm) per 10 in length
Flow Rate and Pressure Drop Formulas 40.00 4.0
Flow Rate (gpm) = Clean ΔP x Length Factor
Recommended Maximum Viscosity x Flow Factor 50.00 5.0
Change Out P: 30psi (2.1bar)
Operating Differential Pressure @ Ambient Clean ΔP = Flow Rate x Viscosity x Flow Factor
Length Factor
Temperature: 40psi (2.7bar)
Notes:
Dimensions 1. Clean ΔP ispsi differential at start.
2. Viscosity is centistokes. Use Conversion Tables for other units.
1 ⁄ 16 in. ID x 2 ⁄ 16 in OD (max) 3. Flow Factor is ΔP/GPM at 1cks for 10 in.
7
1
10, 20, 30, 40 and 50 in. continuous (or single).
4. Length Factors convert fl ow or ΔP from 10 in. (single length) to
nominal lengths required cartridge length.
Nominal Filtration Ratings (90%)
.5μm, 1μm, 5μm, 10μm, 25μm, and 50μm
Ordering Information
MBN M — —
Cartridge Code Micrometer Nominal Length End Cap Confi guration Seal Material
Rating (μm)
MBN MegaBond Nominal Code Inches mm Code Description Code Material
.5
9-4 9¾ 248 None DOE (w/o gaskets) None No Seal Material (Std. DOE)
1
10 10 254 AR 020/Flat (Gelman) Poly Foam Gaskets w/
5 A Collars (DO only)
19-4 19½ 495 DO DOE
10 E EPR
20 20 508 LL 120 O-ring both ends**
25 N Buna-N
29-4 29¼ 743 LR 120 O-ring/Recessed**
50 S Silicone (O-ring only)
30 30 762 Std. open end/Polypropylene
OB spring closed end
39-4 39 991 T PFA Encapsulated Viton ®
(222, 226 O-ring only)
PR 213 O-ring/Recessed**
40 40 1016
V Viton ®
SC 226 O-ring/Flat
50 50 1270 Poly Foam Gaskets w/o
SF 226 O-ring/Fin W
75 75 1905 Collars (DO only)
222 open end/Polypropylene
TB
spring closed end
TC 222 O-ring/Flat
TF 222 O-ring/Fin
TX 222 O-ring/Flex Fin
XA DOE w/Extended Core
Ext. core open end/Poly-
XB
propylene spring closed end
** Available only in 9-¾” (9-4) and 19-
½” (19-4) lengths.
Specifi cations are subject to change without notifi cation. © 2010 Parker-Hannifi n Corporation
For User Responsibility Statement, see www.parker.com/safety domnick hunter Process Filtration - North America
All Rights Reserved
Fulfl o is a registered trademark of Parker-Hannifi n Corporation
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
DS_IP_MegaBond N Rev. A
63