Page 151 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

! 1

Testing 149

1

Terminating solid conductors: Simply push in conductor Inserting/removing fine-stranded conductors: Open the Testing with 1 mm Ø test pin.
until it hits backstop. clamping unit via push-button and insert stripped Touch contact with current bar.
conductor until it hits backstop.

804 Series

804 Series Terminal Strips provide “internal commoning”
to meet requirements for not routing the ground (earth)
conductor over the board. This enables custom terminal
strips to be commoned and marked at the factory upon
request.

Colors Spacer Marking

Mixed-color terminal strips available upon request. Terminal strips with spacer are available upon request. Marking via self-adhesive strips or factory direct printing.

fine-stranded, fine-stranded,
fine-stranded, with ferrules with pin terminal
tip-bonded (gastight crimped) (gastight crimped)