Page 40 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

PCB Terminal Strips 6 mm 2
1 Pin Spacing: 10 mm, 12.5 mm, 15 mm
38 745 Series
● Terminal strips with screwdriver-actuated CAGE CLAMP (cannot be
®
commoned!)
● 4 versions with Ex e (increased safety) approval

● UL approval up to 600 V for 12.5 mm pin spacing

● Custom color combinations
● Double solder pins for high mechanical stability

● Integrated testing tap

● Carrier for Mini-WSB and WMB Tags

Technical data:
15 mm
10 mm
Pin Spacing 0.394 in. 12.5 mm 0.591 in. Current-Carrying Capacity Curve
0.492 in.
2
Ratings per IEC/EN 60664-1 IEC/EN 60664-1 IEC/EN 60664-1 Pin spacing: 7.5 mm / Conductor size: 6 mm “f-st”
Based on: EN 60512-5-2 / Reduction factor: 1
Overvoltage category III III II III III II III III II
Pollution degree 3 2 2 3 2 2 3 2 2 Current in A
Rated voltage 800 V 1000 V 1000 V 1000 V 1000 V 1000 V 1000 V 1000 V 1000 V
Rated surge voltage 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 40
Nominal current 41 A 41 A 41 A 41 A 41 A 41 A 41 A 41 A 41 A
Approvals per UL/CSA UL/CSA UL/CSA 30
Use group UL1059 B C D B C D B C D
Rated voltage 300 V 300 V 600 V 600 V 600 V – 600 V 600 V – 20
Nominal current UL 10 A 10 A 5 A 30 A 30 A – 30 A 30 A –
Nominal current CSA 10 A 10 A 5 A 30 A 30 A – 30 A 30 A – 10
Conductor and solder pin data:
Connection technology CAGE CLAMP ® 0 10 20 30 40 50 60 70 80 90 100105
Conductor size: solid 0.2–6 mm 2 Ambient operating temperature in °C
Conductor size: fine-stranded 0.2–6 mm 2 2-, 4-, 6-, 12-pole Conductor rated current
Conductor size: fine-stranded 0.25–4 mm 2 (with insulated ferrule)
Conductor size: fine-stranded 0.25–4 mm 2 (with uninsulated ferrule)
AWG 24–10
Strip length 11–12 mm / 0.43–0.47 in.
Conductor entry angle 45° to PCB
Solder pin: length/width 4.5 mm / 1 x 1.4 mm
Solder pin: drilled hole diameter 1.8 +0.1 mm
Material data: 745 Series accessories: Pages:
Material group I
Insulating material Polyamide 6.6 (PA 6.6) Marking accessories 570 – 573
Flammability rating per UL 94 0V Operating tools 556 – 559
Lower/Upper limit temperature -60 °C / +105 °C Test plug 568
Clamping spring material Chrome nickel spring steel (CrNi)
Contact material Electrolytic copper (E )
Cu
Contact plating tin-plated
Technical data for Ex e II (4) versions:
10 mm
Pin Spacing 0.394 in.
Ratings per ATEX: PTB 06 ATEX 1014 U IECEx: IECEx PTB 06.0039 U
Rated voltage 440 VDC
Nominal current 37 A
Note on UL approval for 600 V:
The conductor entry is for field and factory wiring and meets spacing requirements for 600 V UL (Use Group C). The solder
pins are for factory wiring only. The suitability and spacing shall be evaluated in the end-use equipment, based on relevant
end-product standard.

Additional approvals and corresponding ratings can be found at www.wago.com For additional technical information, see Section 13.