Page 48 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

Double-Deck PCB Terminal Strips 2.5 mm 2
1 Pin Spacing: 5 mm, 7.5 mm, 10 mm
46 736 Series
● Terminal strips with screwdriver-actuated CAGE CLAMP ®

● High-density, double-deck design for space-efficient wiring of multiple
conductors in confined areas

● Custom inkjet marking for all termination levels

● Terminal strips with commoning strips for distributing potentials,
see pages 67 – 69

Technical data:

Pin Spacing 5 mm 7.5 mm 10 mm Current-Carrying Capacity Curve
0.197 in. 0.295 in. 0.394 in.
2
Ratings per IEC/EN 60664-1 IEC/EN 60664-1 IEC/EN 60664-1 Pin spacing: 5 mm / Conductor size: 2.5 mm “f-st”
Based on: EN 60512-5-2 / Reduction factor: 1
Overvoltage category III III II III III II III III II
Pollution degree 3 2 2 3 2 2 3 2 2 Current in A
Rated voltage 250 V 320 V 630 V 400 V 630 V 1000 V 630 V 1000 V 1000 V 45
Rated surge voltage 4 kV 4 kV 4 kV 6 kV 6 kV 6 kV 8 kV 8 kV 8 kV 40
Nominal current 21 A 21 A 21 A 21 A 21 A 21 A 21 A 21 A 21 A 35
Approvals per UL/CSA UL/CSA UL/CSA 30
Use group UL 1059 B C D B C D B C D 25
Rated voltage 300 V – 300 V 300 V – 300 V 300 V – 300 V 20
Nominal current UL 10 A – 10 A 10 A – 10 A 10 A – 10 A 15
Nominal current CSA 10 A – 10 A 10 A – 10 A 10 A – 10 A 10
5
Conductor and solder pin data:
Connection technology CAGE CLAMP ® 0 10 20 30 40 50 60 70 80 90 100105
Conductor size: solid 0.08–2.5 mm 2 Ambient operating temperature in °C
Conductor size: fine-stranded 0.08–2.5 mm 2 2-, 4-, 6-, 12-pole Conductor rated current
Conductor size: fine-stranded 0.25–1.5 mm 2 (with insulated ferrule)
Conductor size: fine-stranded 0.25–2.5 mm 2 (with uninsulated ferrule)
AWG 28–12 (12: THHN, THWN)
Strip length 5–6 mm / 0.20–0.24 in.
Conductor entry angle 45° to PCB
Solder pin: length/width 4 mm / 0.7 x 0.7 mm
Solder pin: drilled hole diameter 1.3 +0.1 mm
Material data: 736 Series accessories: Pages:
Material group I
Insulating material Polyamide 6.6 (PA 6.6) Marking accessories 570 – 573
Flammability rating per UL 94 0V Operating tools 556 – 559
Lower/Upper limit temperature -60 °C / +105 °C Commoning strips 67 – 69
Clamping spring material Chrome nickel spring steel (CrNi) Test plug module 204 – 205
Contact material Electrolytic copper (E )
Cu
Contact plating tin-plated

Additional approvals and corresponding ratings can be found at www.wago.com For additional technical information, see Section 13.