Page 524 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

Panel Feedthrough Terminal Strips with Operating Levers, 16 mm
2
9 Pin Spacing: 11.5 mm
522 828 Series
● Panel feedthrough terminal strips with CAGE CLAMP on both sides
®
● Easy, tool-free installation
● Tool-free opening and closing – fingers open/close levers

● Several clamping units can be held open simultaneously — convenient
for terminating multi-core cables
● 600 V UL

Technical data:

Pin Spacing 11.5 mm
0.45 in.
Ratings per IEC/EN 60664-1
Overvoltage category III III II
Pollution degree 3 2 2
Rated voltage 1000 V 1000 V 1000 V
Rated surge voltage 8 kV 8 kV 8 kV
Nominal current 41 A 41 A 41 A
Approvals per UL/CSA
Use group UL 1059 B C D
Rated voltage 600 V 600 V –
Nominal current UL 30 A 30 A –
Nominal current CSA 30 A 30 A –
Conductor data:
Connection technology CAGE CLAMP ®
Conductor size: solid 1.5–16 mm 2
Conductor size: fine-stranded 1.5–16 mm 2
Conductor size: fine-stranded 1.5–10 mm 2 (with insulated ferrule)
Conductor size: fine-stranded 1.5–10 mm 2 (with uninsulated ferrule)
AWG 16–6
Strip length 12–13 mm / 0.47–0.51 in.

Material data:
Material group I
Insulating material Polyamide 6.6 (PA 6.6)
Flammability rating per UL 94 0V
Lower/Upper limit temperature -60 °C / +105 °C
Clamping spring material Chrome nickel spring steel (CrNi)
Contact material Electrolytic copper (E )
Cu
Contact plating tin-plated

Additional approvals and corresponding ratings can be found at www.wago.com. For additional technical information, see Section 13.