Page 64 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

Quadruple-Deck PCB Terminal Strips 2.5 mm 2
1 Pin Spacing: 5 mm
62 738 Series
● Terminal strips with screwdriver-actuated CAGE CLAMP ®

● High-density, quadruple-deck design for space-efficient wiring of multi-
ple conductors in confined areas

● Angled conductor entry and CAGE CLAMP actuation streamline
®
operation
● Custom inkjet marking for all termination levels

● Terminal strips with commoning strips for distributing potentials,
see pages 67 – 69

Technical data:

Pin Spacing 5 mm Current-Carrying Capacity Curve
0.197 in.
2
Ratings per IEC/EN 60664-1 Pin spacing: 5 mm / Conductor size: 2.5 mm “f-st”
Based on: EN 60512-5-2 / Reduction factor: 1
Overvoltage category III III II
Pollution degree 3 2 2 Current in A
Rated voltage 250 V 320 V 630 V 45
Rated surge voltage 4 kV 4 kV 4 kV 40
Nominal current 18 A 18 A 18 A 35
Approvals per UL/CSA 30
Use group UL 1059 B C D 25
Rated voltage 300 V – 300 V 20
Nominal current UL 10 A – 10 A 15
Nominal current CSA 10 A – 10 A 10
Conductor and solder pin data: 5
Connection technology CAGE CLAMP ® 0 10 20 30 40 50 60 70 80 90 100105
Conductor size: solid 0.08–2.5 mm 2 Ambient operating temperature in °C
Conductor size: fine-stranded 0.08–2.5 mm 2 2-, 4-, 6-, 12-pole Conductor rated current
Conductor size: fine-stranded 0.25–1.5 mm 2 (with insulated ferrule)
Conductor size: fine-stranded 0.25–2.5 mm 2 (with uninsulated ferrule)
AWG 28–12 (12: THHN, THWN)
Strip length 5–6 mm / 0.20–0.24 in.
Conductor entry angle 45° to PCB
Solder pin: length/width 4 mm / 0.7 x 0.7 mm
Solder pin: drilled hole diameter 1.3 +0.1 mm
Material data: 738 Series accessories: Pages:
Material group I
Insulating material Polyamide 6.6 (PA 6.6) Marking accessories 540 – 543
Flammability rating per UL 94 0V Operating tools 526 – 528
Lower/Upper limit temperature -60 °C / +105 °C Commoning strips 67 – 69
Clamping spring material Chrome nickel spring steel (CrNi) Test plug module 198 – 199
Contact material Electrolytic copper (E )
Cu
Contact plating tin-plated

Additional approvals and corresponding ratings can be found at www.wago.com. For additional technical information, see Section 13.