Page 51 - Parker - Cat 4660

H6 – High Performance Hydraulic Hose A Hose

Features

ƒ Largest temperature range in a medium
pressure hydraulic hose
ƒ Low length change under pressure
Certifications

ƒ Meets/Exceeds SAE 100R17 Performance Tubing
B

Applications/Markets
Coiled Air Hose
ƒ Medium pressure hydraulic applications
ƒ Over-the-sheave and boom hose applications & Fittings

C

Part Nominal Maximum Maximum Minimum Permanent
Working
Bend
Number I.D. O.D. Pressure Radius Weight Fitting
Series
Transportation
lbs
inch mm inch mm psi MPa inch mm lbs./ft. kg./mtr.
D
H604 1/4 6 .49 12 3,000 20.7 2.00 51 .12 .18 56
H605 5/16 8 .56 14 3,000 20.7 2.25 57 .14 .21 HY
H606 3/8 10 .65 17 3,000 20.7 2.50 64 .19 .28 56
H608 1/2 13 .78 20 3,000 20.7 3.50 89 .29 .43 56
H610* 5/8 16 1.00 25 3,000 20.7 4.00 102 .47 .70 HY
Fittings
H612* 3/4 19 1.17 30 3,000 20.7 4.75 121 .69 1.03 HY
Construction Fittings E
Tube: Copolyester 56 Series – pg. E-10 HY Series
Reinforcement: One or two braids of high tensile steel wire HY Series - Available from Parker Hose Products Division
Cover: Abrasion-resistant copolyester For most Parker products, Crimp Die Selection charts can
be found online at www.parker.com/crimpsource
Operating Parameters Access instructions are on pg. G-14
Temperature Range: Colors Tooling, Equipment
• (H604 thru H608) -70°F (-57°C) to +250°F (121°C) & Accessories
(H610 thru H612) -50°F (-45°C) to +250°F (121°C) Black
• Synthetic, synthetic blend, water, and water/oil emulsion
hydraulic fluids limited to +135°F (+57°C) Notes F
Vacuum Rating: 28 inch Hg • *Two wire braid, Non-perforated cover
Change in length at Max. Working Pressure: +2% to -4% • Twin line hose available
Min. Burst Pressure is 4x Max. Working Pressure at 73°F (23°C) • Preformed assemblies
• Non-Perforated Cover
General Technical

For detailed ordering information, please consult price list or contact Parflex Division. G
Parker Hannifin Corporation | Parflex Division | Ravenna, Ohio | parker.com/pfd A-25