Page 5 - Barksdale - Air Suspension Valves

55581 Series Linkless Cabin Air Suspension leveling Valve 55581 Series
55581 Series

generation of cabin air suspension leveling solutions from North
Linkless Cabin Air The Barksdale 55581 Linkless Cab Valve (LCV) is the latest
America’s leading heavy vehicle air suspension valve supplier.
Suspension Leveling Valve The LCV combines valve and linkage into a compact, lightweight
unit. High temperature, engineered polymer construction stands
up to the extreme operating environments generated by emission
controls. Compact linear design minimizes the valve footprint,
allowing greater cabin suspension design freedom. Nitrile seals
provide years of reliable service.

Press on mounting points and push to connect DOT/SAE fi ttings
minimize installation time. The LCV is permanently sealed,
eliminating maintenance and unauthorized adjustment.

The LCV is available in multiple port confi gurations with 1/4”
or 6mm push to connect fi ttings and standard or micro-adjust
bushings.
General Specifications
Features Operating Media: Air
Value Seal Type: Poppet
– Combined valve and link design Operating Pressure:
– Engineered plastic construction 150 PSI (10 bar) maximum
Performance Operating -40ºF to +230ºF
– Engineered for extreme temperatures Temperature: (-40ºC to +110ºC)
– Precise deadband optimizes cabin height control Maximum Flow Rate: 50 SLPM
– Corrosion resistant (standard liters per minute)
Reduced installation cost Port Size: 1/4” Push-to-connect*
– Press on mounting points 6 mm Push-to-connect*
– Push to connect tubing connections * DOT FMVSS 571.106 and SAE
– Fixed length / no adjustment required J2494-3 compliant
Port Confi guration: Single supply port
Applications 3 2 1 Single or dual delivery ports
4
Semi tractor cabin air suspension 0 and 180 degree port alignment
1 1
1
4 4 4 4 4 4 4 3 3 3 3 3 3 3 2 2 2 2 2 2 2 Materials of Construction:
1 1
1
1
Technical Drawings Structural components: D Internally lubricated high
D temperature polymer
D D D D D D Sealing surfaces: D D D D D D D Thermoset nitrile
4 D 3 2 1
11.4 Weight: .39 lbs. (180 grams)
.45
39.7 11.4
1.56 11.4 11.4 .45 11.4 11.4
.45
.45 11.4 .45 .45
D
39.7
39.7 .45 11.4 Flow Curve
.45
1.56
D 39.7 1.56 39.7 39.7
1.56 39.7
1.56 1.56
C 1.56 39.7 C LINEAR CAB VALVE FLOW
1.56
32 1.3 Pressure @ 135 psi
2X
C C C C C C 47.0 C C C C C C 60
1.85
C .79 20 47.0 32 2X 32 32 1.3 32 6.35 32 C
2X 1.3
47.0
1.85
2X
47.0 1.85 47.0 47.0 2X 1.3 32 2X 2X .25 1.3
1.3
1.85 47.0 1.85 1.85 11.4 2X 1.3 32 50
20 20 1.85 47.0 .45 2X 1.3 REV. X5
6.35
20 .79 .79 20 1.85 20 6.35
.79 20 6.35 2X .25 .25
2X
6.35 6.35
39.7 .79 20 .79 .79 2X .25 6.35 2X 2X .25 .25
1.56 .79 2X .25 6.35 57 REV. REV. X5 X5 40
2X .25 2.26 REV. X5 REV. REV. X5 55581-Q2 X5 REV. X5 REV. X5
57
2.26
57
57
C 2.26 FLOW (slpm) 2.26 2.26 57 57 C 2.26 2.26 INLET 55581-Q2 55581-Q2 30 EXHAUST
57
57
Engineered for high temperature environments B 2X 32 1.3 2.26 55581-Q2 DWG. C SIZE B 55581-Q2 55581-Q2 20
47.0
1.85 DWG. C 55581-Q2 55581-Q2
262
Precise dead band optimizes cabin height control B .79 20 B B B B B B 10.3 2X 6.35 .25 DWG. C SIZE DWG. B C DWG. DWG. DWG. B C SIZE SIZE B B C SIZE DWG. B B B 10
C
SIZE
SIZE
262
10.3
262 10.3 262 262 262 REV. X5 C SIZE
10.3 262 10.3 10.3 0
10.3 262
NOTES: 10.3 57
1. PORTS: 2.26 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20
1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3.
DUAL OUTLET - ONE FRONT, ONE REAR.
NOTES:
NOTES: LINKLESS CAB VALVE 55581-Q2
NOTES: 2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND: COMPRESSION (inches)
1. PORTS:
NOTES:NOTES:
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE).
1. PORTS:
NOTES:
1. PORTS: 1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3. DRAWN DATE UNLESS OTHERWISE NEXT ASSEMBLY XXXXXXXX X XX-XX-XX
1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3.
1. PORTS:1. PORTS:
DUAL OUTLET - ONE FRONT, ONE REAR.
NOTES:
1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3. XXX XX-XX-XX SPECIFIED
1. PORTS:
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C].
DUAL OUTLET - ONE FRONT, ONE REAR.
1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3. 1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3.
1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3.
A
B DUAL OUTLET - ONE FRONT, ONE REAR. CHECKED DATE DIMENSIONAL TOLERANCES DUAL PORT DWG. B XXXXXXXX X XX-XX-XX
DUAL OUTLET - ONE FRONT, ONE REAR. DUAL OUTLET - ONE FRONT, ONE REAR.
1. PORTS:
2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND:
2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND:
4. STROKE ±1.97" [50 mm].
DUAL OUTLET - ONE FRONT, ONE REAR.
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE).
XX-XX-XX
ARE PER ANSI Y14.5-82
1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3.
XXX
2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND:
XXXXXXXX X
XX-XX-XX A
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE).
XX-XX-XX
2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND:2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND:
AND AS FOLLOWS:
DUAL OUTLET - ONE FRONT, ONE REAR.
NEXT ASSEMBLY
5. DEAD BAND .2" [5mm].
DRAWN DATE
2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND:
UNLESS OTHERWISE
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE). DRAWN DATE UNLESS OTHERWISE MATERIAL LINKLESS CAB VALVE C SIZE NEXT ASSEMBLY DIST. XXXXXXXX X XX-XX-XX
APPROVED DATE
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE). 10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE).
XXXXXXXX X X
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C].
HEAT TREAT
.X ±.03
CERTIFICATIONS REQUIRED
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C].
XXX
UNLESS OTHERWISE SPECIFIED
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE). DRAWN DATE XX-XX-XX SPECIFIED .XX ±.010 LINKLESS CAB VALVE XXXXXXXX XX-XX-XX
XX-XX-XX
XXX
XXX
XX-XX-XX
2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND:
XX-XX-XX
NEXT ASSEMBLY
XXXXXXXX XXXXXXXXX
XX-XX-XX
UNLESS OTHERWISEUNLESS OTHERWISE
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C]. XXX DRAWN DATE XXX SPECIFIED DIMENSIONAL TOLERANCES SPECIFICATION DUAL PORT NEXT ASSEMBLY MAT'L. NEXT ASSEMBLYNEXT ASSEMBLY XXXXXXXX X XXXXXXXX X XX-XX-XX XX-XX-XX
XX-XX-XXX
DRAWN DATEDRAWN DATE
6. MATERIALS:
A A
PHYS.
XX-XX-XX
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C].3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C].
PROCESS
DUAL PORT
ORIGIN
CHECKED DATE
XXXXXXXX X5
XXXXXXXX X XX-XX-XX
CHECKED DATE UNLESS OTHERWISE
XXXXXXXX X
UNLESS OTHERWISE LINKLESS CAB VALVE
.XXX ±.005
02-26-09
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE).
262
4. STROKE ±1.97" [50 mm].
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C].
SPECIFIED SPECIFIED
.010 FIM
DIMENSIONAL TOLERANCES
BODY - ENGINEERING THERMOPLASTIC - BLACK.
XXX
XX-XX-XX XX-XX-XX
4. STROKE ±1.97" [50 mm].
GmbH
THIS DOCUMENT CONTAINS
ARE PER ANSI Y14.5-82
XXX
LINKLESS CAB VALVELINKLESS CAB VALVE CHEM.
A A 4. STROKE ±1.97" [50 mm]. 3211 Fruitland Avenue • Los Angeles, CA 90058 •  800-835-1060 • Fax: 323-589-3463 • www.barksdale.com
XX-XX-XX
LINKLESS CAB VALVE FINISH
CHECKED DATE XX-XX-XX
XX-XX-XX
10.3
ARE PER ANSI Y14.5-82 ARE PER ANSI Y14.5-82 DUAL PORT
ANGLE ±2°
XXX PROPRIETARY INFORMATION
ARE PER ANSI Y14.5-82
XXXXXXXX X XX-XX-XX
XX-XX-XX
XXXXXXXX X XXXXXXXX X
SPECIFIED
XXX
DRAWN DATE
XXXXXXXX X XXXXXXXX X
LINKLESS CAB VALVE
XX-XX-XXXX-XX-XX
A A
DIMENSIONAL TOLERANCES AND AS FOLLOWS:
NEXT ASSEMBLY
SEALS - NITRILE RUBBER.
XXXXXXXX X XXXXXXXX X A A
XX-XX-XX
XX-XX-XX
REV.
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C].
NONE
XXX CHECKED DATECHECKED DATE
4. STROKE ±1.97" [50 mm].4. STROKE ±1.97" [50 mm].
PCO
DUAL PORTDUAL PORT
XXXXXXXX X #
AND AS FOLLOWS:
XXXXXXXX X XX-XX-XX DATE
DIMENSIONS ARE TO BE MET
ARE PER ANSI Y14.5-82
DIMENSIONAL TOLERANCESDIMENSIONAL TOLERANCES
AND MAY NOT BE DISCLOSED
5. DEAD BAND .2" [5mm].
5. DEAD BAND .2" [5mm].
REFERENCE: BVS-111
XX-XX-XX DIMENSIONAL TOLERANCES
XX-XX-XX
APPROVED DATE
MATERIAL DUAL PORT
SPECIFIED
CHECKED DATE
XXXXXXXX X A
4. STROKE ±1.97" [50 mm].
XXX
XX-XX-XX
.X ±.03
A A
MATERIAL
XXXXXXXX X XX-XX-XX
HEAT TREAT
XX-XX-XX XX-XX-XX
AFTER PLATING. C'BORES
XXXXXXXX X XXXXXXXX X
HEAT TREAT
CERTIFICATIONS REQUIRED
DIST.
XXX
APPROVED DATE
TO OTHERS FOR ANY
SCALE
CERTIFICATIONS REQUIRED
WEIGHT
.X ±.03
XX-XX-XX
www.barksdale.com
ARE PER ANSI Y14.5-82
DIST.
XX-XX-XXXX-XX-XX
DWG.
7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN
XXX AND AS FOLLOWS: AND SPOTFACE .031 CORNER
XXXXXXXX X
CERTIFICATIONS REQUIREDCERTIFICATIONS REQUIRED 55581-Q2
XX-XX-XX
5. DEAD BAND .2" [5mm].
XXX
XX-XX-XX
XXX
REV.
APPROVED DATE XX-XX-XX
XX-XX-XX
AND AS FOLLOWS:AND AS FOLLOWS:
.XX ±.010
XXX PURPOSE, NOR USED FOR
CHECKED DATE
XXXXXXXX X XX-XX-XX
MAT'L. ORIGIN C
4. STROKE ±1.97" [50 mm].
AND AS FOLLOWS:
HEAT TREAT
MATERIAL
RADIUS.
6. MATERIALS:
6. MATERIALS:
DIMENSIONAL TOLERANCES
XXX APPROVED DATEAPPROVED DATE
.XX ±.010
CERTIFICATIONS REQUIRED PHYS.
MAT'L.
MANUFACTURING PURPOSES
PROCESS
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar]
XX-XX-XX
A 5. DEAD BAND .2" [5mm].
ORIGIN
DIST.
MAT'L.
XXXXXXXX X XXXXXXXX
XX-XX-XX
.X ±.03
XX-XX-XXX
02-26-09
.X ±.03
A
.XXX ±.005
.X ±.03 BREAK ALL CORNERS .010 R.
.XX ±.010 .010 FIM
THIS DOCUMENT CONTAINS
XXX
See Barksdale’s Standard Conditions of Sale • Specifications are subject to modification at any time • Bulletin #A0008-C • 02/12 • ©2012 • Printed in the U.S.A.
HEAT TREAT
AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS).
02-26-09
BODY - ENGINEERING THERMOPLASTIC - BLACK.
CERTIFICATIONS REQUIRED
GmbH
XXXXXXXX X5
BODY - ENGINEERING THERMOPLASTIC - BLACK.
.XXX ±.005
XXX
ARE PER ANSI Y14.5-82 MATERIAL
SPECIFICATION
THIS DOCUMENT CONTAINS
WITHOUT WRITTEN PERMISSION
GmbH XXXXXXXX X
REMOVE ALL BURRS.
.010 FIM .X ±.03
6. MATERIALS: 5. DEAD BAND .2" [5mm].5. DEAD BAND .2" [5mm]. XXX APPROVED DATE XX-XX-XX XX-XX-XX XX-XX-XX AND AS FOLLOWS: .XX ±.010 SPECIFICATION MATERIAL MATERIAL DUAL PORT FINISH HEAT TREATHEAT TREAT PHYS. CHEM. CHEM. 1:1 PROCESS DIST. ORIGIN DIST. XXXXXXXX DIST. X XXXXXXXX X5 XX-XX-XX XX-XX-XX A X5 XX-XX-XX 5
FINISH
XX-XX-XX
5. DEAD BAND .2" [5mm].
ANGLE ±2°
6. MATERIALS:6. MATERIALS:
.XX ±.010
PROPRIETARY INFORMATION
SEALS - NITRILE RUBBER.
PHYS.
MAT'L.
Los Angeles, CA 90058-0843
SEALS - NITRILE RUBBER.
ANGLE ±2°
PROCESS
ALL MACHINED SURFACES
PROPRIETARY INFORMATION
XXX FROM BARKSDALE, INC.
BODY - ENGINEERING THERMOPLASTIC - BLACK. THIS DOCUMENT CONTAINS THIS DOCUMENT CONTAINSTHIS DOCUMENT CONTAINS 125 .010 FIM SPECIFICATION MATERIAL SPECIFICATIONSPECIFICATION FINISH HEAT TREAT CHEM. MAT'L. REFERENCE: BVS-111 PHYS. GmbH PROCESS SHEET 1 PROCESS DIST. ORIGIN OF 1 02-26-09 REV. REV. XX-XX-XX
APPROVED DATE
MAT'L.
6. MATERIALS:
.010 FIM
CERTIFICATIONS REQUIRED PHYS. XXXXXXXX X5 PCO #
ORIGIN
.XXX ±.005 .XX ±.010
NONE
DATE
Ph: 323-589-6181 Fax: 323-583-6252
DIMENSIONS ARE TO BE MET
GmbH PCO #
NONE
AND MAY NOT BE DISCLOSED
TO BE MAX.
BODY - ENGINEERING THERMOPLASTIC - BLACK. BODY - ENGINEERING THERMOPLASTIC - BLACK.
02-26-0902-26-09
.X ±.03 .XXX ±.005 .XXX ±.005
DATE
.010 FIM
XXXXXXXX X5XXXXXXXX X5
ANGLE ±2° .XXX ±.005
FINISH
ORIGIN NONE # XXXXXXXX X5
FINISH REFERENCE: BVS-111
CHEM. ORIGIN
DIMENSIONS ARE TO BE MET
XXXXXXXX X 02-26-09
PROCESS
PHYS.
GmbH
AND MAY NOT BE DISCLOSED
THIS DOCUMENT CONTAINS
BODY - ENGINEERING THERMOPLASTIC - BLACK.
SEALS - NITRILE RUBBER. PROPRIETARY INFORMATION XX-XX-XX .010 FIM AFTER PLATING. C'BORES FINISH www.barksdale.com WEIGHT CHEM. NONE SCALE SCALE DWG. DWG. CHEM. GmbH PCO REV. DATE REV. REV.
TO OTHERS FOR ANY
6. MATERIALS:NITRILE RUBBER. SEALS - NITRILE RUBBER.
.XX ±.010 ANGLE ±2° ANGLE ±2°
XXX PROPRIETARY INFORMATIONPROPRIETARY INFORMATION
ANGLE ±2°2
AND SPOTFACE .031 CORNER SPECIFICATION
SEALS -
AFTER PLATING. C'BORES
REFERENCE: BVS-111 WEIGHT
SEALS - NITRILE RUBBER. 4
TO OTHERS FOR ANY
www.barksdale.com
7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN
7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN
AND SPOTFACE .031 CORNER
AND MAY NOT BE DISCLOSEDAND MAY NOT BE DISCLOSED
NONE
PURPOSE, NOR USED FOR
REV.
XXXXXXXX X5 PCO #
SEALS - NITRILE RUBBER. 3 AND MAY NOT BE DISCLOSED AFTER PLATING. C'BORES RADIUS. DIMENSIONS ARE TO BE METDIMENSIONS ARE TO BE MET FINISH WEIGHT REFERENCE: BVS-111 DWG. REFERENCE: BVS-111REFERENCE: BVS-111 DWG. 1 GmbH 55581-Q2 DATE REV. 02-26-09 DATE DATE
PHYS.
DIMENSIONS ARE TO BE MET ANGLE ±2°
PCO #
MAT'L.
PROCESS
PROPRIETARY INFORMATION
.XXX ±.005
PURPOSE, NOR USED FOR
BODY - ENGINEERING THERMOPLASTIC - BLACK.
PCO #
CHEM.
NONE
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar]
RADIUS.
MANUFACTURING PURPOSES
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar]
AND MAY NOT BE DISCLOSED
REV.
SPECIFICATION
TO OTHERS FOR ANY
WEIGHT 1:1
REFERENCE: BVS-111 55581-Q2
.010 FIM AFTER PLATING. C'BORESAFTER PLATING. C'BORES
BREAK ALL CORNERS .010 R.
AND SPOTFACE .031 CORNER
MANUFACTURING PURPOSES
SCALE
NOTES: 7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN PURPOSE, NOR USED FOR TO OTHERS FOR ANYTO OTHERS FOR ANY REMOVE ALL BURRS. www.barksdale.com www.barksdale.comwww.barksdale.com 1:1 DWG. WEIGHT SCALE C C NONE 55581-Q2 DATE X5 REV. REV.
REV.
THIS DOCUMENT CONTAINS DIMENSIONS ARE TO BE MET
DWG.
SCALE
55581-Q255581-Q2
7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN
BREAK ALL CORNERS .010 R.
AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS).
AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS).
TO OTHERS FOR ANY
RADIUS.
AND SPOTFACE .031 CORNERAND SPOTFACE .031 CORNER
PROPRIETARY INFORMATION AFTER PLATING. C'BORES
PURPOSE, NOR USED FORPURPOSE, NOR USED FOR
www.barksdale.com
WITHOUT WRITTEN PERMISSION
AND SPOTFACE .031 CORNER
REMOVE ALL BURRS.
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar] MANUFACTURING PURPOSES BREAK ALL CORNERS .010 R. ALL MACHINED SURFACES RADIUS. Los Angeles, CA 90058-0843 WEIGHT WEIGHT C SCALE DWG. 1:1 55581-Q2 REV. REV. X5
PCO #
WITHOUT WRITTEN PERMISSION
7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN
Los Angeles, CA 90058-0843Los Angeles, CA 90058-0843 SHEET 1 C
FROM BARKSDALE, INC.
ALL MACHINED SURFACES
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar] .244 cu in/min [4 cc/min] @ 80 psi [5.5 bar]
DIMENSIONS ARE TO BE MET
RADIUS.
PURPOSE, NOR USED FOR
Los Angeles, CA 90058-0843
FROM BARKSDALE, INC.
AND MAY NOT BE DISCLOSED RADIUS.
MANUFACTURING PURPOSESMANUFACTURING PURPOSES
BREAK ALL CORNERS .010 R.BREAK ALL CORNERS .010 R.
www.barksdale.com 1:1
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar]
1. PORTS: AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS). WITHOUT WRITTEN PERMISSION ALL MACHINED SURFACES AFTER PLATING. C'BORES Ph: 323-589-6181 Fax: 323-583-6252 SCALE 1:1 C C OF 1 X5 REV. X5 X5
Ph: 323-589-6181 Fax: 323-583-6252
OF 1
125
TO BE MAX.
SHEET 1
TO OTHERS FOR ANY REMOVE ALL BURRS. TO BE MAX.
REMOVE ALL BURRS.REMOVE ALL BURRS.
WITHOUT WRITTEN PERMISSIONWITHOUT WRITTEN PERMISSION
125
BREAK ALL CORNERS .010 R.
MANUFACTURING PURPOSES
AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS). AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS).
SHEET 1
7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN
Los Angeles, CA 90058-0843
AND SPOTFACE .031 CORNER
AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS).
PURPOSE, NOR USED FOR
1/4" D.O.T. PUSH-TO-CONNECT FITTINGS PER SAE-J2494-3. FROM BARKSDALE, INC. FROM BARKSDALE, INC.FROM BARKSDALE, INC. RADIUS. ALL MACHINED SURFACESALL MACHINED SURFACES Ph: 323-589-6181 Fax: 323-583-6252 1:1 OF 1 55581-Q2X5
WITHOUT WRITTEN PERMISSION
ALL MACHINED SURFACES2
REMOVE ALL BURRS.
4 4
C 1 1
TO BE MAX. 2
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar]
125
125
BREAK ALL CORNERS .010 R.125
TO BE MAX.
Los Angeles, CA 90058-0843
MANUFACTURING PURPOSES ALL MACHINED SURFACES
DUAL OUTLET - ONE FRONT, ONE REAR. AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS). 3 3 3 FROM BARKSDALE, INC. TO BE MAX. 2 TO BE MAX.TO BE MAX. Ph: 323-589-6181 Fax: 323-583-6252 1 1:1 SHEET 1 OF 1 X5
OF 1
SHEET 1
SHEET 1
Ph: 323-589-6181 Fax: 323-583-6252Ph: 323-589-6181 Fax: 323-583-6252
OF 1
4
125
WITHOUT WRITTEN PERMISSION
REMOVE ALL BURRS.
Los Angeles, CA 90058-0843
FROM BARKSDALE, INC.
2. CENTER-TO-CENTER LENGTH AT MID DEAD BAND: 4 4 4 3 3 3 125 2 2 2 Ph: 323-589-6181 Fax: 323-583-6252 1 SHEET 1 1 1 OF 1
10.3" [262 mm] ± 1/16" [1.5 mm] (NON-ADJUSTABLE). 4 3 NEXT ASSEMBLY 1
2
3. OPERATING TEMPERATURE RANGE -40 to 225 F [-40 to 110 C]. DRAWN DATE UNLESS OTHERWISE LINKLESS CAB VALVE XXXXXXXX X XX-XX-XX
XXX
XX-XX-XX
SPECIFIED
XXXXXXXX X
A 4. STROKE ±1.97" [50 mm]. CHECKED DATE DIMENSIONAL TOLERANCES DUAL PORT XXXXXXXX X XX-XX-XX
ARE PER ANSI Y14.5-82
XXX
XX-XX-XX
AND AS FOLLOWS:
XX-XX-XX
5. DEAD BAND .2" [5mm]. APPROVED DATE .X ±.03 MATERIAL HEAT TREAT CERTIFICATIONS REQUIRED DIST. A
XXX XX-XX-XX .XX ±.010 XXXXXXXX X XX-XX-XX
6. MATERIALS: .XXX ±.005 MAT'L. PHYS. PROCESS ORIGIN
BODY - ENGINEERING THERMOPLASTIC - BLACK. THIS DOCUMENT CONTAINS .010 FIM ANGLE ±2° SPECIFICATION FINISH CHEM. GmbH XXXXXXXX X5 02-26-09
SEALS - NITRILE RUBBER. PROPRIETARY INFORMATION DIMENSIONS ARE TO BE MET REFERENCE: BVS-111 NONE PCO # REV. DATE
AND MAY NOT BE DISCLOSED
AFTER PLATING. C'BORES
7. MAXIMUM PERMISSIBLE INTERNAL LEAKAGE IS LESS THAN TO OTHERS FOR ANY AND SPOTFACE .031 CORNER www.barksdale.com WEIGHT SCALE DWG. REV.
PURPOSE, NOR USED FOR
RADIUS.
.244 cu in/min [4 cc/min] @ 80 psi [5.5 bar] MANUFACTURING PURPOSES BREAK ALL CORNERS .010 R. 1:1 C 55581-Q2
AS SHIPPED (NOT INCLUDING CONNECTIONS AND FITTINGS). WITHOUT WRITTEN PERMISSION REMOVE ALL BURRS. X5
ALL MACHINED SURFACES
FROM BARKSDALE, INC. Los Angeles, CA 90058-0843
125
TO BE MAX. Ph: 323-589-6181 Fax: 323-583-6252 SHEET 1 OF 1
4 3 2 1