Page 137 - Parker - Parker Pneumatic

Catalog PDN1000-3US Actuator Products – Round Body Cylinders
Parker Pneumatic P Series

P Series

• Repairable design, aluminum construction
• 6 bore sizes: 1-1/8" to 4"
• Double-acting, spring-return and spring-extend models
• Cushions optional at either or both ends
• Universal nose and tang mounts
• Standard stroke lengths to 20 inches in one inch increments,
plus 1-1/2", 2-1/2" and 3-1/2" strokes. Fraction strokes and Operating information
strokes over 20 inches are available upon request. Operating pressure: 150 PSIG (8 bar)
Temperature range:
B Standard seals -10°F to 165°F (-23°C to 74°C)
-10°F to 250°F (-23°C to 121°C)
Fluorocarbon seals
Filtration requirements: 40 micron, dry filtered air

Ordering information

2-1/2" C K P L U 1 6 C X6"

Actuator Products
Bore size Series Stroke
Round Body Cylinders
1-1/8" Specify in
1-1/2" Piston inches.
2" Blank O-ring piston Show times
symbol “X”
2-1/2" L Lipseal piston just ahead
3" Sensors available on of stroke
4" lipseal pistons only. length.
Series
Cushion head end Ports Cushion cap end
Blank No cushion U N.P.T.F. Blank No cushion
SR/SM/SRD/SRDM
Cushion head Cushion cap
C C
end Seals / options end
Blank Buna-N
SRX
Series
Double rod V Fluorocarbon Rod material
Blank Single rod M Magnet with Blank Standard rod
K Double rod Buna-N seals 1 416 Stainless
D steel 2
P1L
Series
Mounting style Spring
Blank Standard E Spring extend Rod thread
N No tang R Spring return 6 Standard
A Dual tang 3 Special
P1A
Special number
Series
Use “S” symbol only (For special rod end specify “CC”
Safety Cushion if special feature is thread Dia. A and LE or LE1 or
Dim. or submit sketch.)
Adjustment Location required (specify).
P
1 NOTE: Do not use
Series
symbol “S” for rod Rod diameter style
end modification. 1 Standard
For double rod
4 HEAD 2
END cylinders specify rod
code twice.
3
With port in position 1, Notes: Sensors
cushion location will be 1 Must specify lipseal piston with magnet option. For sensors see page B339.
2 Standard on 1-1/8" bore. {D} not required.
position 4.
For ordering purposes, when special options or common modifications are requested, the factory will assign a sequential part
number in place of the model number.
B136 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics