Page 20 - Clippard - Pneumatic Modules
P. 20
MODULAR VALVE SYSTEM
Mounting Subplates provide mounting for up to three modular valves,
and provide various port options. Very compact size, lightweight, easy-to-
mount, and valves are easily replaced.
No. of
Part No. Valves Ports Length Width Height Mounting
CM-04 1 #10-32 3.00” 3.00” 0.625” (2) 0.196” dia.
CM-02 1 1/8” NPT 3.50” 3.00” 0.625” (2) 0.196” dia.
CM-036 2 1/8” NPT 7.00” 3.00” 0.625” (4) 0.196” dia.
CM-037 3 1/8” NPT 10.75” 3.00” 0.625” (4) 0.196” dia.
Subplate Dimensions
R-101 subplate mounts to mounting strips with #10-32 screws and lockwashers provided. Ports on
module base are numbered in the same pattern as on the subplate, making piping easy to identify. Module stem is keyed to fit center
hole in subplate; assures fast insertion and proper positioning.
#10-32 thd. (12 holes)
1.625 0.375 0.437
#10-32 thd. 1.375
0.406 0.187 (12 holes) 0.250
0.750
1.250
1.375 1
1.000 1.365 8 2
1 dia. 7 3
8 2
7 3 6 5 4
1.500
2.000 6 5 4
2.500
1.734 sq.
1.062
0.406 dia. 45˚ typ.
0.812
R-101 R-111
R-111 subplate mounts in 1 3/8” (34.9) hole in electrical box, control panel.
Mounting screws and gasket provided seal subplate to mounting plate.
Mounting Strips & Stand- When subplates are mounted to mounting strips, the components 0.468
build into a strong, rigid assembly. Because of extra tolerance R-102-08
Off Dimensions 14.562
in the holes, note that strips may be adjusted before screws are R-102-07
fully tightened. This permits accurate alignment of subplates. 12.937
R-107-20 The identifying number following the second dash in the R-102-06
part number indicates the number of modules the 11.312
#10-32 thd. both ends R-102-05
strip will accommodate while still proving a short 9.687
extension with one hole at both ends for using R-102-04
in mounting the assembly to stand-offs or 8.062
2 3/8 hex. other structures. The strip will accommodate R-102-03
6.437
1 additional module if no extensions R-102-02
For providing space beneath assembled for mounting are needed. (Every 4.812
group of modules, use R-106 (order R- two holes will accept a subplate.) R-102-01
107-20, packet of four with hardware). 3.187
Provides 2” clearance from enclosure 0.218 dia.
wall for piping with Clippard fittings 0.375
and tubing. Keeps piping and installation 0.812
neat.
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com 258