Page 2 - Parker - Glass-Mate PMG Filter Cartridge

P. 2

glAss-MATE PMg fIlTEr CArTrIDgE
TM

Absolute and economical filtration with pleated microfiberglass cartridges

glass-Mate™ Cartridge flow factors
rating flow Flow Rate and Pressure Drop Formulae:
(µm) factor glass-Mate flow vs. dP
Flow Rate (gpm) = Clean ΔP x Length Factor
0.45 .108 Viscosity x Flow Factor 1.20
1 .102 Clean ΔP = FlowRate x Viscosity x Flow Factor 1.00 PMG004
2 .095 Length Factor 0.80 PMG010
3 .090 PMG020
5 .072 notes: delta P 0.60 PMG030
10 .060 1. Clean ΔP is PSI differential at start. 0.40 PMG050
Viscosity is centistokes. Use Conversion
2.
20 .042 Tables for other units. 0.20 PMG100
40 .018 3. Flow Factor is ΔP/GPM at 1cks for 10 inch (or 0.00 PMG200
single). 0 2 4 6 8 10 12 PMG400
4. Length Factors convert flow or ΔP from 10 inch gPM
(single length) to required cartridge lenth.
oRDERinG inFoRMation

PMG

Particle Nominal Length Support Construction Seal Material End Cap Conﬁguration Special Options
Removal Rating CODE LENGTH (mm) CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION
CODE (µm) 9 9 5/8” (244) F Glass Filled A Polyethylene Foam AR 020 O-ring/Recessed Cap Z6 Individual Poly
002 0.2 10 9 13/16” (249) Polypropylene (DOE Gasket Only) DO Double Open End (DOE) Bag only
004 0.45 19 19 5/8” (498) (core only) E EPR DX DOE With Core Extender Z15 Individual Poly Bag
010 1.0 20 19 15/16” (506) P Polyester N Buna-N LL** 120 O-ring/Recessed Cap 15/ctn. (20”, 30”, 40”)
020 2.0 29 29 1/4” (743) S Silicone LR** 120 O-ring/Recessed Cap (PXD only)
050 5.0 30 30 1/16” (764) V Viton ® OB Std. open end / Polypro Z30 Individual Poly bag
100 10 39 39” (991) X No Seal Material Spring Closed End 30/ctn. (10”)
200 20 40 40” (1016) PR** 213 O-ring/Recessed Cap
400 40 SC 226 O-ring/Flat Cap
SF 226 O-ring/Fin
TC 222 O-ring/Flat Cap
TF 222 O-ring/Fin
TX 222 O-ring/Flex Fin
XB Ext. core open end/
Polypro Spring Closed End
SSC S.S. Inserted 226 O-ring/Closed
SSF S.S. Inserted 226 O-ring/Fin
STC S.S. Inserted 222 O-ring/Closed
STF S.S. Inserted 226 O-ring/Fin
** Available only in 9 5/8” (-9) and
19 5/8” (-19 lengths)

tEcHnical sUPPoRt anD PRoDUct inFoRMation
Parker provides our customers with unsurpassed product consistency and cost-efficiency. Our experienced professionals can help you select the right solu-
tion for your application. Orders can be emailed directly to PAFsales@parker.com. For additional information contact your local distributor. Information on
product specifications, applications and chemical compatibility can be found on our web site at www.parker.com or through the Oxnard office.
Parker designs and manufactures an extensive line of innovative solutions for specific applications in the Microelectronics, Biopharmaceutical, Food and
Beverage, Industrial and Chemical industries.
DISTRIBUTED BY:

Process Advanced Filtration Division
2340 Eastman Avenue
Oxnard, California, USA 93030
Toll Free: +1 877 784 2234
Specifications are subject to change without notification. Phone: +1 805 604 3400
Glas-Mate TM is a trademark of Parker Hannifin Corporation. Fax: +1 805 604 3401
Viton ® is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
© 2007 Parker Hannifin Corporation. PAFsales@parker.com
www.parker.com
SPEC C-2041-FB Rev. A 9/07 36

1 2