Page 161 - Wago_Rail-MountedTerminalBlockSystems_Volume1_2015_US.pdf

Accessories for Multilevel Installation Terminal Blocks S
3

159

1 Conductor sizes: 0.5 mm² – 6 mm² “s + f-st”;
Push-in conductor sizes: 1 mm² – 6 mm² “s”
and 0.75 mm² – 4 mm²
“insulated ferrules, 12 mm”
2 250 V/ 3
400 V = rated voltage
4 kV/
6 kV = rated surge voltage
3 = pollution degree
(see Section 14)
3 250 V/4 kV potential-ground
4 400 V/6 kV potential-potential
5 Strip length, see packaging or instructions.
Accessories Application note:

Appropriate marking systems: WMB/Marking strips N-disconnect slide links, used in installation terminal
(see Section 13) blocks, consist of switch contacts that are opened and then
closed again as part of the regular circuit testing. To guar-
Push-in type jumper bar, insulated, TOPJOB S group marker carrier, antee a reliable connection, a corrosion-resistant contact
®
I N 32 A, snap-on type for jumper slot, area is required on the N-busbar.

light gray 5 mm wide Historically, uninsulated copper busbars, that have been
from 1 to 3 2004-433 200 (8x25) gray 2009-191 50 (2x25) cleaned/stripped of any possible corrosion prior to install,
from 1 to 4 2004-434 200 (8x25) Screwless end stop, can be used in dry, pollution-free locations.
from 1 to 5 2004-435 100 (4x25) for DIN 35 rail, According to DIN VDE 0100-520 (VDE 0100 Part 520),
from 1 to 6 2004-436 100 (4x25) 6 mm wide installation equipment exposed to contamination or corro-
from 1 to 7 2004-437 100 (4x25) gray 249-116 100 (4x25) sive substances (e.g., water) that promote corrosion or
from 1 to 8 2004-438 100 (4x25) Screwless end stop, deterioration, must be protected or made of a corrosion-
or wear- resistant material. In these cases, tinned copper
from 1 to 9 2004-439 100 (4x25) for DIN 35 rail, busbars guarantee a reliable connection.
from 1 to 10 2004-440 100 (4x25) 10 mm wide
gray 249-117 50 (2x25) WAGO only offers tinned copper busbars.
Push-in type wire jumper, Operating tool,
insulated, 3.5 mm and 5.5 mm blade,
I N 18 A, for TOPJOB S installation terminal blocks
®
wire size 1.5 mm² 2009-310 50
L = 60 mm 2009-412 100 (10x10) Operating tool,
L = 110 mm 2009-414 100 (10x10) 3.5 mm and 2.5 mm blade,
L = 250 mm 2009-416 100 (10x10) for TOPJOB S installation terminal blocks
®
2009-309 50
Test plug adapter,
for 4 mm Ø test plug
gray 2009-174 100 (4x25)
Banana plug,
for socket 4 mm Ø,
color mixed
215-111 50
Testing tap,
for max. 2.5 mm²
gray 2009-182 100 (4x25)
Test plug,
with 500 mm cable,
2 mm Ø
red 210-136 50
Test plug,
with 500 mm cable,
2.3 mm Ø
yellow 210-137 50
WMB Multi marking system,
10 strips with 10 markers per card,
stretchable 5 - 5.2 mm
plain 793-5501 5
Marking strip, plain,
11 mm wide,
50 m roll
white 2009-110 1