Page 1 - Parker - Fulflo ProBond Filter Cartridges
P. 1

121





                                           ™
                     ®
        Fulfl o  ProBond
        Filter Cartridges

        Patented Break-Through in Resin-Bonded

        Cartridge Design






        Parker ProBond™ cartridges have a
        unique, proprietary two-stage fi ltration
        design to maximize particle retention
        and service life in viscous fl uid fi ltra-
        tion applications. An outer, spiral,
        prefi lter wrap, made from a fi ber blend
        of polyester and acrylic, increases car-
        tridge strength and eliminates residual
        debris associated with conventional or
        machined and grooved, resin bonded
        cartridges.
        ProBond fi lter cartridges are available
        in eight differentiated removal ratings of
        2μm, 5μm, 10μm, 25μm, 50μm, 75μm,
        125μm and 150μm pore sizes to meet
        a wide range of performance require-
        ments.

        Contact Information                 Benefi ts



        Parker-Hannifi n Corporation        •  Outer, spiral wrap collects large   •  One-piece construction eliminates
        Process Advanced Filtration Division  particles and agglomerates,          bypass concerns with multi-length
        2340 Eastman Avenue                   while inner layers control particle   cartridges and eases change out
        Oxnard, California, USA 93030         removal at rated size              •  Silicone-free construction ensures
                                            •  Outer wrap increases surface area,   no contamination to adversely affect
        toll free +1 877 784 2234             & eliminates loose debris and con-   adhesion properties of coatings
        phone +1 805 604 3400                 tamination caused by machined
        fax +1 805 604 3401                   products                           Applications
        PAFsales@parker.com                 •  Extra-long acrylic fi bers provide
                                              added strength, resist breakage
                                                                                 • Paints
        www.parker.com/processfi ltration     and migration common with com-     • Printing Inks
                                              petitive “short fi ber” cartridges
                                                                                 • Adhesives
                                            •   Available with optimal single-
                                                                                 • Resins
                                              open-end seals  (222 o-ring with
                                                                                 • Emulsions
                                              fl at cap) in ABS or nylon
                                                                                 • Chemical Coatings
                                            •  Phenolic resin impregnation
                                                                                 • Organic Solvents
                                              strengthens cartridge for use with
                                                                                 • Plasticizers
                                              high viscosity fl uid
                                                                                 • Waxes
                                            •  Withstands pressure surges up to
                                                                                 •  Oil & Gas Fluids
                                              150psid across cartridge (depend-
                                                                                 • Petroleum Products
                                              ing on fl uid temperature)
                                                             65
   1   2