Page 101 - Parker - Daedal manually driven positioning slides and stages

Width: 2.62” (66,5 mm) Mounting: Imperial

Dimensions Inches For additional end view dimensions, refer to the
Center Drive CR4500 crossed roller slide drawing, page 44.
Consult factory for critical dimension concerns.
0.38 B
(mid-travel)

2.62 D T b
#4510 Bracket A
#4509 Bracket (mid-travel)
1.00 (Aperture
Qty. (8) Mtg. Holes (Top) models only) A
#10-32 thd. on 2.00” dia. B.C. C (mid-travel)
2.62
T a
1.00 0.80 2.70
1.06
2.00
Ctr'd
A
(mid-travel) A 1.44 A 0.06
Qty. (2) C'Bored Mtg. Holes (Base) (mid-travel) (mid-travel)
for 1/4" S.H.C.S.
Single-Axis X-Y-Z Low-Profile X-Y-Z Standard Crossed Roller Positioners
Side Drive

B C
(mid-travel) 1.00 (Aperture
models only)
0.38 #4560 Bracket
D
A
1.80 (mid-travel)
3.44
2.62
#4559 Bracket
1.31
A
(mid-travel) T b
Qty. (8) Mtg. Holes (Top)
#10-32 thd. on 2.00” dia. B.C.
2.62
F
1.00
E
2.00 T a
Ctr'd
A A 1.50 A 0.06
(mid-travel) (mid-travel) (mid-travel)
Qty. (2) C'Bored Mtg. Holes (Base)
for 1/4" S.H.C.S.
Single-Axis X-Y-Z Low-Profile X-Y-Z Standard

Center Drive Dimensions – in Side Drive Dimensions – in
Style Drive Mechanism A B C D A B C D E F
Imperial Micrometer 0.50 in 5.35 2.73 0.95 0.54 3.82 1.78 1.20 0.54 0.93 3.18
1.0 in 6.93 4.31 1.22 0.71 4.07 3.10 1.45 0.71 0.68 2.93
Solid Metric Micrometer 13 mm 5.35 2.73 0.95 0.54 3.82 1.78 1.20 0.54 0.93 3.18
Top 25 mm 6.93 4.31 1.22 0.71 4.07 3.10 1.45 0.71 0.68 2.93
Differential Screw 0.08/0.3 in 5.01 2.39 0.95 0.62 3.82 1.44 1.20 0.62 0.93 3.18
Fine Screw 0.75 in 5.24 2.62 0.95 0.58 3.82 1.72 1.20 0.58 0.93 3.18
Imperial Micrometer 0.50 in 5.35 2.73 0.95 0.54 3.82 1.78 1.20 0.54 0.93 3.18
Aperture Metric Micrometer 13 mm 5.35 2.73 0.95 0.54 3.82 1.78 1.20 0.54 0.93 3.18
(1.0 in) Differential Screw 0.08/0.3 in 5.01 2.39 0.95 0.62 3.82 1.44 1.20 0.62 0.93 3.18
Fine Screw 0.75 in 5.24 2.62 0.95 0.58 3.82 1.72 1.20 0.58 0.93 3.18

Parker Hannifin Corporation www.parkermotion.com
Electromechanical Automation Division
Irwin, Pennsylvania 99